[NSRCA-discussion] Help with 10s bricks.......

[Matthew Finley]

Hello all,

OK, have a question that I am hopping someone can shed some light on. Here is the delima.....

Charger:  1010B

Battery:  Thunder Power 10s Brick

The Battery has two balance leads coming off of the pack, one lead is marked A, and one B.

Here is the practice I would do in my thinking/experience.....

A) Power on Charger
B) Select 10s Balance
C) Connect balance leads to balance board starting with A to the outer most edge connection, and then B on the inner connection.
D) Plug in main Power lead

Why is it that I keep blowing my balance board ? I have tried multiple balance boards, and they all seem to be shorting when this sequence is performed.....

What am I not seeing, and I'm sure even with my infinite wisdom ( lol ) it will probably be a duh moment for me......

Thank you for your input and help.


Matthew E Finley
Q.C.I Technical Assistant
248-794-8487 mobile
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20160905/721ae6e0/attachment.html>