[NSRCA-discussion] Futaba Servo Question
Ed Alt
ed_alt at hotmail.com
Fri Oct 7 07:44:06 AKDT 2016
Good point. There's a solution for that which doesn't require a separate regulator assembly.
________________________________
From: Vogel, Peter <Peter_Vogel at intuit.com>
Sent: Friday, October 7, 2016 11:37 AM
To: General pattern discussion; Ed Alt"; Larry Diamond; Ron
Subject: Re: [NSRCA-discussion] Futaba Servo Question
The only reason I can think of would be when you have some servos that are NOT HV and some that are in the plane. But you'd be better off in that case doing what the heli guys did with tail Gyros that couldn't handle HV, regulate the specific channel voltage down between the RX and the servo instead of regulating the whole system between the battery and the RX.
Get Outlook for iOS<https://aka.ms/o0ukef>
On Fri, Oct 7, 2016 at 8:02 AM -0700, "Ed Alt via NSRCA-discussion" <nsrca-discussion at lists.nsrca.org<mailto:nsrca-discussion at lists.nsrca.org>> wrote:
Although you can certainly run any of the HV servos at 5.8V, I'm puzzled as to why you would want to. You're giving up significant speed and torque, which you paid a premium price to have. Just use a regulator that gets you up into the intended voltage range for a 2S LiPo.
Ed
________________________________
From: NSRCA-discussion <nsrca-discussion-bounces at lists.nsrca.org> on behalf of Ron via NSRCA-discussion <nsrca-discussion at lists.nsrca.org>
Sent: Friday, October 7, 2016 10:54 AM
To: Larry Diamond; General pattern discussion
Subject: Re: [NSRCA-discussion] Futaba Servo Question
Yes. I've been doing it for several years.
On Oct 6, 2016 8:52 PM, Larry Diamond via NSRCA-discussion <nsrca-discussion at lists.nsrca.org> wrote:
Can I use 5.8v regulated voltage from a 7.4v lipo for futaba servos considered HV rated at 6vdc to 7.4vdc+?
Sent via the Samsung Galaxy S® 6, an AT&T 4G LTE smartphone
-------- Original message --------
From: Don Szczur via NSRCA-discussion <nsrca-discussion at lists.nsrca.org>
Date: 10/6/16 8:38 PM (GMT-06:00)
To: nsrca-discussion at lists.nsrca.org
Subject: [NSRCA-discussion] Its time
Couple more contests left in the season, but basically 2 more weeks and it's time. Let the preparations begin....
https://www.youtube.com/watch?v=yhC-qH8dDZQ
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20161007/9d76d76b/attachment.html>
More information about the NSRCA-discussion
mailing list