[NSRCA-discussion] Futaba Servo Question

[atwooddon at aol.com]

Yes, but the servo will be slower and less 'power'.  I have been running some Futaba HV servos at 5.8V and they worked fine, just slower etc.

Don

 

 

 

-----Original Message-----
From: Larry Diamond via NSRCA-discussion <nsrca-discussion at lists.nsrca.org>
To: General pattern discussion <nsrca-discussion at lists.nsrca.org>
Sent: Thu, Oct 6, 2016 6:52 pm
Subject: Re: [NSRCA-discussion] Futaba Servo Question



Can I use 5.8v regulated voltage from a 7.4v lipo for futaba servos considered HV rated at 6vdc to 7.4vdc+?







Sent via the Samsung Galaxy S® 6, an AT&T 4G LTE smartphone




-------- Original message --------
From: Don Szczur via NSRCA-discussion <nsrca-discussion at lists.nsrca.org> 
Date: 10/6/16  8:38 PM  (GMT-06:00) 
To: nsrca-discussion at lists.nsrca.org 
Subject: [NSRCA-discussion] Its time 



Couple more contests left in the season, but basically 2 more weeks and it's time.  Let the preparations begin....


https://www.youtube.com/watch?v=yhC-qH8dDZQ









_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20161007/8792adf3/attachment.html>