[NSRCA-discussion] Airplane rack

[Randy Forbus]

http://www.rcuniverse.com/forum/rc-scale-aircraft-169/11607729-transporting-large-scale-models-2.html

transporting large scale models - Page 2<http://www.rcuniverse.com/forum/rc-scale-aircraft-169/11607729-transporting-large-scale-models-2.html>
www.rcuniverse.com
Originally Posted by karl hibbs it was costing me \ to go flying. Gas is 158 yen per liter here in Japan. That's down from about 170 yen earlier in


 Page 2


________________________________
From: NSRCA-discussion <nsrca-discussion-bounces at lists.nsrca.org> on behalf of Jas via NSRCA-discussion <nsrca-discussion at lists.nsrca.org>
Sent: Thursday, June 30, 2016 1:53 PM
To: General pattern discussion
Subject: [NSRCA-discussion] Airplane rack

Looking to make an airplane rack for a minivan. Was thinking 1" PVC pipe with a vertical down center piece. What has everyone else done? Hoping to hold at least 4 fuselages on it (2 under it) and some wings.

Jas iP
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

NSRCA-discussion Info Page<http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>
lists.nsrca.org
If you are interested in Pattern Precision Aerobatics, you may join this list. This list is not restricted to members of NSRCA. We hope you would eventually choose to ...



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20160630/adf06e08/attachment.html>