[NSRCA-discussion] Bowtie

[Jas]

Verne,

I ran into this a while back with the hourglass and now the figure Z. What happens is if a 'large' radius is used in the corners, the 'square' becomes a rectangle because of the loss of the corners. 
Draw a perfect square, then add some equal radi around it and you will see. The plexi-sights show this well (this does t have the radi but print and draw them in and you'll see).



Jas iP

> On Jul 1, 2016, at 1:35 PM, Verne Koester via NSRCA-discussion <nsrca-discussion at lists.nsrca.org> wrote:
> 
> I just read the Judges Chair in the latest K-Factor regarding the Bow Tie in Masters. Their opinion is that the overall shape of the maneuver should form a rectangle rather than a square. I can’t see how that’s geometrically possible. The center portion of the maneuver has two opposing 45 degree lines. Assuming we want the baseline and top line height the same and we want the maneuver centered, the 45 degree lines mandate an overall square shape. The only way to make a rectangle out of it is to either fly an angle of less than 45 degrees through the center or add short straight lines before and after the 45’s going into the radiuses into the verticals. The illustration in the K-Factor showing how the Bow Tie should be shaped illustrates this because the center angle lines in their rectangle drawing are clearly less than 45 degrees. The Masters aresti shows the correct overall shape and it’s square.
>  
> Verne Koester 
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20160701/89632323/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 20480 bytes
Desc: not available
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20160701/89632323/attachment.png>