[NSRCA-discussion] 3mm x 12mm steel washers

[Vicente Bortone]

This is the closets for a metric washer.  12 mm outside diameter and 3.2 mm
inside diameter so you could use 3 mm screws.  Thickness between 2.5 to 3.3
mm.  It is SS 18-8.  Here the link:

http://www.mcmaster.com/#94768a101/=xe8x9x

Vicente "Vince" Bortone

On Fri, May 29, 2015 at 2:55 PM, Dennis Bodary via NSRCA-discussion <
nsrca-discussion at lists.nsrca.org> wrote:

> Have you tried Micro Fasteners?
> --------------------------------------------
> On Fri, 5/29/15, Bill Kutchell via NSRCA-discussion <
> nsrca-discussion at lists.nsrca.org> wrote:
>
>  Subject: Re: [NSRCA-discussion] 3mm x 12mm steel washers
>  To: "Jas" <justanotherflyr at gmail.com>, "General pattern discussion" <
> nsrca-discussion at lists.nsrca.org>
>  Date: Friday, May 29, 2015, 2:17 PM
>
>  Do you have a Fastenal
>  near you?
>
>
> https://www.fastenal.com/products?r=~|categoryl1:%22600000%20Fasteners%22|~%20~|categoryl2:%22600089%20Washers%22|~%20~|categoryl3:%22600097%20Flat%20Washers%22|~%20~|sattr01
> :^Metric$|~%20~|sattr04:^M3$|~%20~|sattr06:^12mm$|~
>
>  Bill
>
>  Sent from my iPhone
>
>  > On May 29, 2015, at 11:46 AM, Jas via
>  NSRCA-discussion <nsrca-discussion at lists.nsrca.org>
>  wrote:
>  >
>  > Went to
>  the best Ace we have around here and unfortunately they
>  didn't have the washers. They had #6 fender washers, but
>  they're 3.5mm x 15mm. The 15 isn't the issue,
>  it's the 3.5 being too big. I miss the Tucson Ace...
>  They had everything, including 5 aisles of nuts and bolts
>  >
>  > Sent from my iP
>  >
>  >> On May 28, 2015,
>  at 11:45 AM, "James Hiller" <jnhiller at earthlink.net>
>  wrote:
>  >>
>  >>
>  Ace Hardware locally has assume hardware selection. It's
>  my first stop.
>  >> Jim
>  >>
>  >>
>  -----Original Message-----
>  >> From:
>  NSRCA-discussion [mailto:nsrca-discussion-bounces at lists.nsrca.org]
>  On
>  >> Behalf Of Jas via
>  NSRCA-discussion
>  >> Sent: Wednesday,
>  May 27, 2015 9:02 PM
>  >> To: General
>  pattern discussion
>  >> Subject: Re:
>  [NSRCA-discussion] 3mm x 12mm steel washers
>  >>
>  >> Yea 3mm is a
>  bit thick, but closest so far lol. Some arfs have come
>  with
>  >> 3x12 washers but can't
>  find them outside of arfs.
>  >>
>  >> Sent from my iP
>  >>
>  >>> On May
>  27, 2015, at 11:48 PM, Steve Hannah <shannah1806 at gmail.com>
>  wrote:
>  >>>
>  >>> Walmart. Who'd uh thunk it?
>  >>
> http://mobile.walmart.com/ip/Flat-Washer-Extra-Thick-Hardened-Steel-Black-Ox
>  >>
>  ide-Fits-M3-Bolts-OD-12mm-Pk-5/41967961
>  >>>
>  >>>
>  >>>
>  >>>>
>  On May 27, 2015, at 20:14, Jas via NSRCA-discussion
>  >> <nsrca-discussion at lists.nsrca.org>
>  wrote:
>  >>>>
>  >>>> Anyone know where I might find
>  some of these? Thanks
>  >>>>
>  >>>> Sent from my iP
>  >>>>
>  _______________________________________________
>  >>>> NSRCA-discussion mailing
>  list
>  >>>> NSRCA-discussion at lists.nsrca.org
>  >>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>  >>
>  _______________________________________________
>  >> NSRCA-discussion mailing list
>  >> NSRCA-discussion at lists.nsrca.org
>  >> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>  >
>  _______________________________________________
>  > NSRCA-discussion mailing list
>  > NSRCA-discussion at lists.nsrca.org
>  > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>  _______________________________________________
>  NSRCA-discussion mailing list
>  NSRCA-discussion at lists.nsrca.org
>  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20150530/6706cb20/attachment.html>