[NSRCA-discussion] 3mm x 12mm steel washers

Dennis Bodary d_bodary at yahoo.com
Sat May 30 03:43:30 AKDT 2015


Have you tried Micro Fasteners?
--------------------------------------------
On Fri, 5/29/15, Bill Kutchell via NSRCA-discussion <nsrca-discussion at lists.nsrca.org> wrote:

 Subject: Re: [NSRCA-discussion] 3mm x 12mm steel washers
 To: "Jas" <justanotherflyr at gmail.com>, "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
 Date: Friday, May 29, 2015, 2:17 PM
 
 Do you have a Fastenal
 near you? 
 
 https://www.fastenal.com/products?r=~|categoryl1:%22600000%20Fasteners%22|~%20~|categoryl2:%22600089%20Washers%22|~%20~|categoryl3:%22600097%20Flat%20Washers%22|~%20~|sattr01:^Metric$|~%20~|sattr04:^M3$|~%20~|sattr06:^12mm$|~
 
 Bill
 
 Sent from my iPhone
 
 > On May 29, 2015, at 11:46 AM, Jas via
 NSRCA-discussion <nsrca-discussion at lists.nsrca.org>
 wrote:
 > 
 > Went to
 the best Ace we have around here and unfortunately they
 didn't have the washers. They had #6 fender washers, but
 they're 3.5mm x 15mm. The 15 isn't the issue,
 it's the 3.5 being too big. I miss the Tucson Ace...
 They had everything, including 5 aisles of nuts and bolts
 > 
 > Sent from my iP
 > 
 >> On May 28, 2015,
 at 11:45 AM, "James Hiller" <jnhiller at earthlink.net>
 wrote:
 >> 
 >>
 Ace Hardware locally has assume hardware selection. It's
 my first stop.
 >> Jim
 >> 
 >>
 -----Original Message-----
 >> From:
 NSRCA-discussion [mailto:nsrca-discussion-bounces at lists.nsrca.org]
 On
 >> Behalf Of Jas via
 NSRCA-discussion
 >> Sent: Wednesday,
 May 27, 2015 9:02 PM
 >> To: General
 pattern discussion
 >> Subject: Re:
 [NSRCA-discussion] 3mm x 12mm steel washers
 >> 
 >> Yea 3mm is a
 bit thick, but closest so far lol. Some arfs have come
 with
 >> 3x12 washers but can't
 find them outside of arfs.
 >> 
 >> Sent from my iP
 >> 
 >>> On May
 27, 2015, at 11:48 PM, Steve Hannah <shannah1806 at gmail.com>
 wrote:
 >>> 
 >>> Walmart. Who'd uh thunk it?
 >> http://mobile.walmart.com/ip/Flat-Washer-Extra-Thick-Hardened-Steel-Black-Ox
 >>
 ide-Fits-M3-Bolts-OD-12mm-Pk-5/41967961
 >>> 
 >>> 
 >>> 
 >>>>
 On May 27, 2015, at 20:14, Jas via NSRCA-discussion
 >> <nsrca-discussion at lists.nsrca.org>
 wrote:
 >>>> 
 >>>> Anyone know where I might find
 some of these? Thanks
 >>>> 
 >>>> Sent from my iP
 >>>>
 _______________________________________________
 >>>> NSRCA-discussion mailing
 list
 >>>> NSRCA-discussion at lists.nsrca.org
 >>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
 >>
 _______________________________________________
 >> NSRCA-discussion mailing list
 >> NSRCA-discussion at lists.nsrca.org
 >> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
 >
 _______________________________________________
 > NSRCA-discussion mailing list
 > NSRCA-discussion at lists.nsrca.org
 > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
 _______________________________________________
 NSRCA-discussion mailing list
 NSRCA-discussion at lists.nsrca.org
 http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
 


More information about the NSRCA-discussion mailing list