[NSRCA-discussion] NSRCA-discussion Digest, Vol 111, Issue 15
Ronald Van Putte
vanputte at cox.net
Wed Feb 25 12:52:47 AKST 2015
WE need a You Tube video of Keith demonstrating this solution.
Ron
> On Feb 25, 2015, at 3:33 PM, Keith Hoard via NSRCA-discussion <nsrca-discussion at lists.nsrca.org> wrote:
>
> Since we have a Solution looking for a Problem . .
>
> How about a spring-loaded Nail strapped to each of the motor Li-Po's that the caller activates before picking up the airplane.
>
> The resulting smoke and fire would give the Line Chief that Warm and Fuzzy feeling that the plane is now SAFE from an unexpected run-away.
>
> I'll send a couple prototypes to raffle off for the F3A Team fundraiser . . .
>
>
> Keith Hoard
> klhoard at hotmail.com <mailto:klhoard at hotmail.com>
>
> > From: nsrca-discussion-request at lists.nsrca.org <mailto:nsrca-discussion-request at lists.nsrca.org>
> > Subject: NSRCA-discussion Digest, Vol 111, Issue 15
> > To: nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>
> > Date: Wed, 25 Feb 2015 12:00:01 -0900
> >
> > Send NSRCA-discussion mailing list submissions to
> > nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>
> >
> > To subscribe or unsubscribe via the World Wide Web, visit
> > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>
> > or, via email, send a message with subject or body 'help' to
> > nsrca-discussion-request at lists.nsrca.org <mailto:nsrca-discussion-request at lists.nsrca.org>
> >
> > You can reach the person managing the list at
> > nsrca-discussion-owner at lists.nsrca.org <mailto:nsrca-discussion-owner at lists.nsrca.org>
> >
> > When replying, please edit your Subject line so it is more specific
> > than "Re: Contents of NSRCA-discussion digest..."
> >
> >
> > Today's Topics:
> >
> > 1. Re: Matt Finley ( Arming Plug ) (John Pavlick)
> > 2. Re: Matt Finley ( Arming Plug ) (Ed Alt)
> > 3. Fwd: Matt Finley ( Arming Plug ) (Matthew Finley)
> > 4. Re: Fwd: Matt Finley ( Arming Plug ) (Ronald Van Putte)
> > 5. Re: Fwd: Matt Finley ( Arming Plug ) (Jon Lowe)
> > 6. Re: Fwd: Matt Finley ( Arming Plug ) (Peter Vogel)
> > 7. Re: Fwd: Matt Finley ( Arming Plug ) (John Pavlick)
> > 8. Re: Fwd: Matt Finley ( Arming Plug ) (John Pavlick)
> > 9. Re: Fwd: Matt Finley ( Arming Plug ) (Ronald Van Putte)
> > 10. DA150 in the Raffle (Atwood, Mark)
> >
> >
> > ----------------------------------------------------------------------
> >
> > Message: 1
> > Date: Tue, 24 Feb 2015 16:08:53 -0500
> > From: "John Pavlick" <jpavlick26 at att.net <mailto:jpavlick26 at att.net>>
> > To: "'John Gayer'" <jgghome at comcast.net <mailto:jgghome at comcast.net>>, "'General pattern
> > discussion'" <nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>>
> > Subject: Re: [NSRCA-discussion] Matt Finley ( Arming Plug )
> > Message-ID: <04e501d05076$1b6596f0$5230c4d0$@net>
> > Content-Type: text/plain; charset="us-ascii"
> >
> > Be careful, you just made WAY too much sense! LOL
> >
> >
> >
> > John Pavlick
> >
> > Cell: 203-417-4971
> >
> >
> >
> > idslogo2
> >
> > Integrated Development Services
> >
> >
> >
> > From: NSRCA-discussion [mailto:nsrca-discussion-bounces at lists.nsrca.org <mailto:nsrca-discussion-bounces at lists.nsrca.org>] On
> > Behalf Of John Gayer via NSRCA-discussion
> > Sent: Tuesday, February 24, 2015 3:53 PM
> > To: General pattern discussion
> > Subject: Re: [NSRCA-discussion] Matt Finley ( Arming Plug )
> >
> >
> >
> > An arming plug was never intended to be the cure-all for all electric safety
> > issues. I consider it a baseline that is easy to comply with. All the
> > anecdotal evidence in the world that each responder to this list is safe
> > does not help establish a minimum set of standards. Each one of you has a
> > good process that works for you. Each one of those processes could be easily
> > amended to incorporate an arming plug if it doesn't already.
> > It isn't those with a good process that are the safety problem. It's the
> > neophyte that hears the experienced pilot expound on why he is safe without
> > an arming plug because he does everything else right. The beginner doesn't
> > hear or doesn't understand all the issues with setting up failsafe, throttle
> > cut, arming conditions, thumb on throttle stick that are part of that
> > process of achieving safe operations in the pits and on the runway whether
> > you have an arming plug or not.
> > I have seen models without arming plugs, without external receiver switches
> > and canopies that require two hands to remove. Last time I checked failsafe
> > operation at a contest, full throttle kill was running about 50%. Most of
> > the remaining were simply going to hold which doesn't help at all if you
> > already have a problem. Eventually a setup like that will cause a disaster.
> > An arming plug is a small thing to add. It can be done lightly, cheaply and
> > reliably. It provides a visual indication to all that the motor/ESC is
> > unpowered. It is not dependent on any other function in the model to
> > operate.
> > John
> >
> > On 2/23/2015 10:49 PM, Steve Hannah via NSRCA-discussion wrote:
> >
> > I agree 100% with Jerry.
> >
> >
> >
> > The multiple throttle kill approach is the best. I have seen the same things
> > as Jerry. The best safety approach is always a multi-pronged solution.
> >
> >
> >
> > I use a slider to drop the throttle below arming level and a switch to
> > nullify the throttle stick. Then, for added security I always hold the stick
> > down with my thumb as my caller/helper retrieves the plane. They usually
> > don't turn off the receiver so I assume my plane is live until I prove
> > otherwise and shut it down.
> >
> >
> >
> > An external plug is one way, but I fail to see how it provides any more
> > safety than my method. Switching it off from my transmitter and disabling
> > the throttle stick are very secure means and I know the ESC has been shut
> > down. I don't rely on a person to pull a plug.
> >
> >
> >
> > Along with that, proving you have a failsafe is a reasonable request and
> > shouldn't be an issue for anyone.
> >
> >
> >
> >
> > On Feb 23, 2015, at 08:50, Budd Engineering via NSRCA-discussion
> > <nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>> wrote:
> >
> > At nearly every contest I've attended since I started flying electric in
> > pattern (the 2004 Nats in Masters) I've seen at least one occurrence where
> > someone retrieved a plane without removing an arming plug first. Usually
> > the pilot reminds the person to do it while they're carrying the plane back
> > or as they're setting it down somewhere. It happens with my planes too and
> > I make sure they switch the receiver off and then I remove my canopy and
> > disconnect the battery directly. But before they even get that far I've
> > taken the other steps to make sure there's virtually no chance the motor is
> > going to run.
> >
> >
> >
> > My point is this. A layered approach is the only way I've found to
> > effectively mitigate this particular risk to the levels of safety that you
> > claim. Relying on someone to remove an arming plug is not a complete
> > panacea and may lend a false sense of security that the motor system has
> > been de-energized, when in fact it may not have been. There's many ways to
> > manage the risk to the desired level, the use of an arming plug is one, and
> > may not necessarily be the best.
> >
> >
> >
> > Jerry
> >
> > Sent from my iPhone
> >
> >
> > On Feb 23, 2015, at 5:29 AM, Matthew Finley via NSRCA-discussion
> > <nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>> wrote:
> >
> > I use the Ultra Deans stlye Arming Plug from F3A Unlimited, and It works
> > very well. I would gather it provides you with a 99 % dagree of confidence
> > that your caller , plane carrier , yourself, or anyone else will not be
> > harmed. Yes... I do agree that there is a miniscuel chance that a pilot /
> > caller could forget to unplug the safety, however I feel most pilots that
> > have been doing it a while is like tying your shoes, or etc.... On all of my
> > electrics except for indoor ships, I have some sort of disconnect. I for one
> > would like to see it an inforced rule at all sanctioned meets not just
> > pattern meets, that any plane over a certain size or weight must have one in
> > order to fly. Just my three pennies
> >
> >
> > Matthew E. Finley
> > QCI - Technology Assistant
> > 614-557-3846 Mobile
> > mfinley at quadcityinnovations.com <mailto:mfinley at quadcityinnovations.com>
> >
> >
> >
> > _______________________________________________
> > NSRCA-discussion mailing list
> > NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>
> > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>
> >
> > _______________________________________________
> > NSRCA-discussion mailing list
> > NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>
> > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>
> >
> >
> >
> >
> >
> >
> > _______________________________________________
> > NSRCA-discussion mailing list
> > NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>
> > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>
> >
> >
> >
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20150224/f582fcac/attachment-0001.html <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20150224/f582fcac/attachment-0001.html>>
> > -------------- next part --------------
> > A non-text attachment was scrubbed...
> > Name: image001.png
> > Type: image/png
> > Size: 735 bytes
> > Desc: not available
> > URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20150224/f582fcac/attachment-0001.png <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20150224/f582fcac/attachment-0001.png>>
> >
> > ------------------------------
> >
> > Message: 2
> > Date: Tue, 24 Feb 2015 16:10:30 -0500
> > From: Ed Alt <ed_alt at hotmail.com <mailto:ed_alt at hotmail.com>>
> > To: "jpavlick at idseng.com <mailto:jpavlick at idseng.com>" <jpavlick at idseng.com <mailto:jpavlick at idseng.com>>, John Pavlick
> > <jpavlick26 at att.net <mailto:jpavlick26 at att.net>>, General pattern discussion
> > <nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>>
> > Subject: Re: [NSRCA-discussion] Matt Finley ( Arming Plug )
> > Message-ID: <SNT404-EAS213C3905365C890D619932CE8160 at phx.gbl <mailto:SNT404-EAS213C3905365C890D619932CE8160 at phx.gbl>>
> > Content-Type: text/plain; charset="us-ascii"
> >
> > I know. This effectively kills the idea for an automatic, electronic rag thrower.
> >
> >
> >
> > > On Feb 24, 2015, at 4:09 PM, John Pavlick via NSRCA-discussion <nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>> wrote:
> > >
> > > Be careful, you just made WAY too much sense! LOL
> > >
> > > John Pavlick
> > > Cell: 203-417-4971
> > >
> > > <image001.png>
> > > Integrated Development Services
> > >
> > > From: NSRCA-discussion [mailto:nsrca-discussion-bounces at lists.nsrca.org <mailto:nsrca-discussion-bounces at lists.nsrca.org>] On Behalf Of John Gayer via NSRCA-discussion
> > > Sent: Tuesday, February 24, 2015 3:53 PM
> > > To: General pattern discussion
> > > Subject: Re: [NSRCA-discussion] Matt Finley ( Arming Plug )
> > >
> > > An arming plug was never intended to be the cure-all for all electric safety issues. I consider it a baseline that is easy to comply with. All the anecdotal evidence in the world that each responder to this list is safe does not help establish a minimum set of standards. Each one of you has a good process that works for you. Each one of those processes could be easily amended to incorporate an arming plug if it doesn't already.
> > > It isn't those with a good process that are the safety problem. It's the neophyte that hears the experienced pilot expound on why he is safe without an arming plug because he does everything else right. The beginner doesn't hear or doesn't understand all the issues with setting up failsafe, throttle cut, arming conditions, thumb on throttle stick that are part of that process of achieving safe operations in the pits and on the runway whether you have an arming plug or not.
> > > I have seen models without arming plugs, without external receiver switches and canopies that require two hands to remove. Last time I checked failsafe operation at a contest, full throttle kill was running about 50%. Most of the remaining were simply going to hold which doesn't help at all if you already have a problem. Eventually a setup like that will cause a disaster.
> > > An arming plug is a small thing to add. It can be done lightly, cheaply and reliably. It provides a visual indication to all that the motor/ESC is unpowered. It is not dependent on any other function in the model to operate.
> > > John
> > >
> > > On 2/23/2015 10:49 PM, Steve Hannah via NSRCA-discussion wrote:
> > > I agree 100% with Jerry.
> > >
> > > The multiple throttle kill approach is the best. I have seen the same things as Jerry. The best safety approach is always a multi-pronged solution.
> > >
> > > I use a slider to drop the throttle below arming level and a switch to nullify the throttle stick. Then, for added security I always hold the stick down with my thumb as my caller/helper retrieves the plane. They usually don't turn off the receiver so I assume my plane is live until I prove otherwise and shut it down.
> > >
> > > An external plug is one way, but I fail to see how it provides any more safety than my method. Switching it off from my transmitter and disabling the throttle stick are very secure means and I know the ESC has been shut down. I don't rely on a person to pull a plug.
> > >
> > > Along with that, proving you have a failsafe is a reasonable request and shouldn't be an issue for anyone.
> > >
> > >
> > >
> > > On Feb 23, 2015, at 08:50, Budd Engineering via NSRCA-discussion <nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>> wrote:
> > >
> > > At nearly every contest I've attended since I started flying electric in pattern (the 2004 Nats in Masters) I've seen at least one occurrence where someone retrieved a plane without removing an arming plug first. Usually the pilot reminds the person to do it while they're carrying the plane back or as they're setting it down somewhere. It happens with my planes too and I make sure they switch the receiver off and then I remove my canopy and disconnect the battery directly. But before they even get that far I've taken the other steps to make sure there's virtually no chance the motor is going to run.
> > >
> > > My point is this. A layered approach is the only way I've found to effectively mitigate this particular risk to the levels of safety that you claim. Relying on someone to remove an arming plug is not a complete panacea and may lend a false sense of security that the motor system has been de-energized, when in fact it may not have been. There's many ways to manage the risk to the desired level, the use of an arming plug is one, and may not necessarily be the best.
> > >
> > > Jerry
> > >
> > > Sent from my iPhone
> > >
> > > On Feb 23, 2015, at 5:29 AM, Matthew Finley via NSRCA-discussion <nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>> wrote:
> > >
> > > I use the Ultra Deans stlye Arming Plug from F3A Unlimited, and It works very well. I would gather it provides you with a 99 % dagree of confidence that your caller , plane carrier , yourself, or anyone else will not be harmed. Yes... I do agree that there is a miniscuel chance that a pilot / caller could forget to unplug the safety, however I feel most pilots that have been doing it a while is like tying your shoes, or etc.... On all of my electrics except for indoor ships, I have some sort of disconnect. I for one would like to see it an inforced rule at all sanctioned meets not just pattern meets, that any plane over a certain size or weight must have one in order to fly. Just my three pennies
> > >
> > >
> > > Matthew E. Finley
> > > QCI - Technology Assistant
> > > 614-557-3846 Mobile
> > > mfinley at quadcityinnovations.com <mailto:mfinley at quadcityinnovations.com>
> > >
> > >
> > > _______________________________________________
> > > NSRCA-discussion mailing list
> > > NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>
> > > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>
> > > _______________________________________________
> > > NSRCA-discussion mailing list
> > > NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>
> > > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>
> > >
> > >
> > >
> > > _______________________________________________
> > > NSRCA-discussion mailing list
> > > NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>
> > > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>
> > >
> > > _______________________________________________
> > > NSRCA-discussion mailing list
> > > NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>
> > > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20150224/f3dde8d8/attachment-0001.html <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20150224/f3dde8d8/attachment-0001.html>>
> >
> > ------------------------------
> >
> > Message: 3
> > Date: Tue, 24 Feb 2015 16:15:31 -0500
> > From: Matthew Finley <rcfin02 at msn.com <mailto:rcfin02 at msn.com>>
> > To: <nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>>
> > Subject: [NSRCA-discussion] Fwd: Matt Finley ( Arming Plug )
> > Message-ID: <BAY403-EAS297ED8D850CB7CAFEB43959B7160 at phx.gbl <mailto:BAY403-EAS297ED8D850CB7CAFEB43959B7160 at phx.gbl>>
> > Content-Type: text/plain; charset="utf-8"
> >
> > I know, I thought before this thread was over we would be going back to one piece wings, single aileron and tail servos, and non computerized tx's lol
> >
> > Sent from my T-Mobile 4G LTE Device
> >
> >
> > -------- Original message --------
> > From: Ed Alt via NSRCA-discussion <nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>>
> > Date: 02/24/2015 4:10 PM (GMT-05:00)
> > To: jpavlick at idseng.com <mailto:jpavlick at idseng.com>, John Pavlick <jpavlick26 at att.net <mailto:jpavlick26 at att.net>>, General pattern discussion <nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>>
> > Subject: Re: [NSRCA-discussion] Matt Finley ( Arming Plug )
> >
> > I know. This effectively kills the idea for an automatic, electronic rag thrower.
> >
> >
> >
> > > On Feb 24, 2015, at 4:09 PM, John Pavlick via NSRCA-discussion <nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>> wrote:
> > >
> > > Be careful, you just made WAY too much sense! LOL
> > >
> > > John Pavlick
> > > Cell: 203-417-4971
> > >
> > > <image001.png>
> > > Integrated Development Services
> > >
> > > From: NSRCA-discussion [mailto:nsrca-discussion-bounces at lists.nsrca.org <mailto:nsrca-discussion-bounces at lists.nsrca.org>] On Behalf Of John Gayer via NSRCA-discussion
> > > Sent: Tuesday, February 24, 2015 3:53 PM
> > > To: General pattern discussion
> > > Subject: Re: [NSRCA-discussion] Matt Finley ( Arming Plug )
> > >
> > > An arming plug was never intended to be the cure-all for all electric safety issues. I consider it a baseline that is easy to comply with. All the anecdotal evidence in the world that each responder to this list is safe does not help establish a minimum set of standards. Each one of you has a good process that works for you. Each one of those processes could be easily amended to incorporate an arming plug if it doesn't already.
> > > It isn't those with a good process that are the safety problem. It's the neophyte that hears the experienced pilot expound on why he is safe without an arming plug because he does everything else right. The beginner doesn't hear or doesn't understand all the issues with setting up failsafe, throttle cut, arming conditions, thumb on throttle stick that are part of that process of achieving safe operations in the pits and on the runway whether you have an arming plug or not.
> > > I have seen models without arming plugs, without external receiver switches and canopies that require two hands to remove. Last time I checked failsafe operation at a contest, full throttle kill was running about 50%. Most of the remaining were simply going to hold which doesn't help at all if you already have a problem. Eventually a setup like that will cause a disaster.
> > > An arming plug is a small thing to add. It can be done lightly, cheaply and reliably. It provides a visual indication to all that the motor/ESC is unpowered. It is not dependent on any other function in the model to operate.
> > > John
> > >
> > > On 2/23/2015 10:49 PM, Steve Hannah via NSRCA-discussion wrote:
> > > I agree 100% with Jerry.
> > >
> > > The multiple throttle kill approach is the best. I have seen the same things as Jerry. The best safety approach is always a multi-pronged solution.
> > >
> > > I use a slider to drop the throttle below arming level and a switch to nullify the throttle stick. Then, for added security I always hold the stick down with my thumb as my caller/helper retrieves the plane. They usually don't turn off the receiver so I assume my plane is live until I prove otherwise and shut it down.
> > >
> > > An external plug is one way, but I fail to see how it provides any more safety than my method. Switching it off from my transmitter and disabling the throttle stick are very secure means and I know the ESC has been shut down. I don't rely on a person to pull a plug.
> > >
> > > Along with that, proving you have a failsafe is a reasonable request and shouldn't be an issue for anyone.
> > >
> > >
> > >
> > > On Feb 23, 2015, at 08:50, Budd Engineering via NSRCA-discussion <nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>> wrote:
> > >
> > > At nearly every contest I've attended since I started flying electric in pattern (the 2004 Nats in Masters) I've seen at least one occurrence where someone retrieved a plane without removing an arming plug first. Usually the pilot reminds the person to do it while they're carrying the plane back or as they're setting it down somewhere. It happens with my planes too and I make sure they switch the receiver off and then I remove my canopy and disconnect the battery directly. But before they even get that far I've taken the other steps to make sure there's virtually no chance the motor is going to run.
> > >
> > > My point is this. A layered approach is the only way I've found to effectively mitigate this particular risk to the levels of safety that you claim. Relying on someone to remove an arming plug is not a complete panacea and may lend a false sense of security that the motor system has been de-energized, when in fact it may not have been. There's many ways to manage the risk to the desired level, the use of an arming plug is one, and may not necessarily be the best.
> > >
> > > Jerry
> > >
> > > Sent from my iPhone
> > >
> > > On Feb 23, 2015, at 5:29 AM, Matthew Finley via NSRCA-discussion <nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>> wrote:
> > >
> > > I use the Ultra Deans stlye Arming Plug from F3A Unlimited, and It works very well. I would gather it provides you with a 99 % dagree of confidence that your caller , plane carrier , yourself, or anyone else will not be harmed. Yes... I do agree that there is a miniscuel chance that a pilot / caller could forget to unplug the safety, however I feel most pilots that have been doing it a while is like tying your shoes, or etc.... On all of my electrics except for indoor ships, I have some sort of disconnect. I for one would like to see it an inforced rule at all sanctioned meets not just pattern meets, that any plane over a certain size or weight must have one in order to fly. Just my three pennies
> > >
> > >
> > > Matthew E. Finley
> > > QCI - Technology Assistant
> > > 614-557-3846 Mobile
> > > mfinley at quadcityinnovations.com <mailto:mfinley at quadcityinnovations.com>
> > >
> > >
> > > _______________________________________________
> > > NSRCA-discussion mailing list
> > > NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>
> > > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>
> > > _______________________________________________
> > > NSRCA-discussion mailing list
> > > NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>
> > > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>
> > >
> > >
> > >
> > > _______________________________________________
> > > NSRCA-discussion mailing list
> > > NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>
> > > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>
> > >
> > > _______________________________________________
> > > NSRCA-discussion mailing list
> > > NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>
> > > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20150224/592b9760/attachment-0001.html <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20150224/592b9760/attachment-0001.html>>
> > -------------- next part --------------
> > _______________________________________________
> > NSRCA-discussion mailing list
> > NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>
> > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>
> >
> > ------------------------------
> >
> > Message: 4
> > Date: Tue, 24 Feb 2015 16:36:23 -0600
> > From: Ronald Van Putte <vanputte at cox.net <mailto:vanputte at cox.net>>
> > To: General pattern discussion <nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>>
> > Subject: Re: [NSRCA-discussion] Fwd: Matt Finley ( Arming Plug )
> > Message-ID: <56E0B541-1A2C-43C0-8738-8FB7F944856B at cox.net <mailto:56E0B541-1A2C-43C0-8738-8FB7F944856B at cox.net>>
> > Content-Type: text/plain; charset="utf-8"
> >
> > Please remember that I warned about a potential ?holy war? if we started discussing arming plugs.
> >
> > Let?s talk about snap rolls or something else that?s not controversial. I kinda think that the ?flick snaps? in F3A are really neat and the pilots whose airplanes perform the snaps in which the tail cones all around should be severely downgraded..
> >
> > Ron Van Putte
> >
> > > On Feb 24, 2015, at 3:15 PM, Matthew Finley via NSRCA-discussion <nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>> wrote:
> > >
> > > I know, I thought before this thread was over we would be going back to one piece wings, single aileron and tail servos, and non computerized tx's lol
> > >
> > > Sent from my T-Mobile 4G LTE Device
> > >
> > >
> > > -------- Original message --------
> > > From: Ed Alt via NSRCA-discussion <nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org> <mailto:nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>>>
> > > Date: 02/24/2015 4:10 PM (GMT-05:00)
> > > To: jpavlick at idseng.com <mailto:jpavlick at idseng.com> <mailto:jpavlick at idseng.com <mailto:jpavlick at idseng.com>>, John Pavlick <jpavlick26 at att.net <mailto:jpavlick26 at att.net> <mailto:jpavlick26 at att.net <mailto:jpavlick26 at att.net>>>, General pattern discussion <nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org><mailto:nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>>>
> > > Subject: Re: [NSRCA-discussion] Matt Finley ( Arming Plug )
> > >
> > > I know. This effectively kills the idea for an automatic, electronic rag thrower.
> > >
> > >
> > >
> > > On Feb 24, 2015, at 4:09 PM, John Pavlick via NSRCA-discussion <nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org> <mailto:nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>>> wrote:
> > >
> > >> Be careful, you just made WAY too much sense! LOL
> > >>
> > >> John Pavlick
> > >> Cell: 203-417-4971
> > >>
> > >> <image001.png>
> > >> Integrated Development Services
> > >>
> > >> From: NSRCA-discussion [mailto:nsrca-discussion-bounces at lists.nsrca.org <mailto:nsrca-discussion-bounces at lists.nsrca.org> <mailto:nsrca-discussion-bounces at lists.nsrca.org <mailto:nsrca-discussion-bounces at lists.nsrca.org>>] On Behalf Of John Gayer via NSRCA-discussion
> > >> Sent: Tuesday, February 24, 2015 3:53 PM
> > >> To: General pattern discussion
> > >> Subject: Re: [NSRCA-discussion] Matt Finley ( Arming Plug )
> > >>
> > >> An arming plug was never intended to be the cure-all for all electric safety issues. I consider it a baseline that is easy to comply with. All the anecdotal evidence in the world that each responder to this list is safe does not help establish a minimum set of standards. Each one of you has a good process that works for you. Each one of those processes could be easily amended to incorporate an arming plug if it doesn't already.
> > >> It isn't those with a good process that are the safety problem. It's the neophyte that hears the experienced pilot expound on why he is safe without an arming plug because he does everything else right. The beginner doesn't hear or doesn't understand all the issues with setting up failsafe, throttle cut, arming conditions, thumb on throttle stick that are part of that process of achieving safe operations in the pits and on the runway whether you have an arming plug or not.
> > >> I have seen models without arming plugs, without external receiver switches and canopies that require two hands to remove. Last time I checked failsafe operation at a contest, full throttle kill was running about 50%. Most of the remaining were simply going to hold which doesn't help at all if you already have a problem. Eventually a setup like that will cause a disaster.
> > >> An arming plug is a small thing to add. It can be done lightly, cheaply and reliably. It provides a visual indication to all that the motor/ESC is unpowered. It is not dependent on any other function in the model to operate.
> > >> John
> > >>
> > >> On 2/23/2015 10:49 PM, Steve Hannah via NSRCA-discussion wrote:
> > >> I agree 100% with Jerry.
> > >>
> > >> The multiple throttle kill approach is the best. I have seen the same things as Jerry. The best safety approach is always a multi-pronged solution.
> > >>
> > >> I use a slider to drop the throttle below arming level and a switch to nullify the throttle stick. Then, for added security I always hold the stick down with my thumb as my caller/helper retrieves the plane. They usually don't turn off the receiver so I assume my plane is live until I prove otherwise and shut it down.
> > >>
> > >> An external plug is one way, but I fail to see how it provides any more safety than my method. Switching it off from my transmitter and disabling the throttle stick are very secure means and I know the ESC has been shut down. I don't rely on a person to pull a plug.
> > >>
> > >> Along with that, proving you have a failsafe is a reasonable request and shouldn't be an issue for anyone.
> > >>
> > >>
> > >>
> > >> On Feb 23, 2015, at 08:50, Budd Engineering via NSRCA-discussion <nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org> <mailto:nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>>> wrote:
> > >>
> > >> At nearly every contest I've attended since I started flying electric in pattern (the 2004 Nats in Masters) I've seen at least one occurrence where someone retrieved a plane without removing an arming plug first. Usually the pilot reminds the person to do it while they're carrying the plane back or as they're setting it down somewhere. It happens with my planes too and I make sure they switch the receiver off and then I remove my canopy and disconnect the battery directly. But before they even get that far I've taken the other steps to make sure there's virtually no chance the motor is going to run.
> > >>
> > >> My point is this. A layered approach is the only way I've found to effectively mitigate this particular risk to the levels of safety that you claim. Relying on someone to remove an arming plug is not a complete panacea and may lend a false sense of security that the motor system has been de-energized, when in fact it may not have been. There's many ways to manage the risk to the desired level, the use of an arming plug is one, and may not necessarily be the best.
> > >>
> > >> Jerry
> > >>
> > >> Sent from my iPhone
> > >>
> > >> On Feb 23, 2015, at 5:29 AM, Matthew Finley via NSRCA-discussion <nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org> <mailto:nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>>> wrote:
> > >>
> > >> I use the Ultra Deans stlye Arming Plug from F3A Unlimited, and It works very well. I would gather it provides you with a 99 % dagree of confidence that your caller , plane carrier , yourself, or anyone else will not be harmed. Yes... I do agree that there is a miniscuel chance that a pilot / caller could forget to unplug the safety, however I feel most pilots that have been doing it a while is like tying your shoes, or etc.... On all of my electrics except for indoor ships, I have some sort of disconnect. I for one would like to see it an inforced rule at all sanctioned meets not just pattern meets, that any plane over a certain size or weight must have one in order to fly. Just my three pennies
> > >>
> > >>
> > >> Matthew E. Finley
> > >> QCI - Technology Assistant
> > >> 614-557-3846 Mobile
> > >> mfinley at quadcityinnovations.com <mailto:mfinley at quadcityinnovations.com> <mailto:mfinley at quadcityinnovations.com <mailto:mfinley at quadcityinnovations.com>>
> > >>
> > >>
> > >> _______________________________________________
> > >> NSRCA-discussion mailing list
> > >> NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org> <mailto:NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>>
> > >> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion> <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>>
> > >> _______________________________________________
> > >> NSRCA-discussion mailing list
> > >> NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org> <mailto:NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>>
> > >> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion> <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>>
> > >>
> > >>
> > >>
> > >> _______________________________________________
> > >> NSRCA-discussion mailing list
> > >> NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org> <mailto:NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>>
> > >> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion> <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>>
> > >>
> > >> _______________________________________________
> > >> NSRCA-discussion mailing list
> > >> NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org> <mailto:NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>>
> > >> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion> <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>><Mail Attachment.txt>_______________________________________________
> > > NSRCA-discussion mailing list
> > > NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org> <mailto:NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>>
> > > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion> <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>>
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20150224/922abc8d/attachment-0001.html <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20150224/922abc8d/attachment-0001.html>>
> >
> > ------------------------------
> >
> > Message: 5
> > Date: Tue, 24 Feb 2015 18:58:07 -0500
> > From: Jon Lowe <jonlowe at aol.com <mailto:jonlowe at aol.com>>
> > To: nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>
> > Subject: Re: [NSRCA-discussion] Fwd: Matt Finley ( Arming Plug )
> > Message-ID: <14bbe06bbd3-d97-1184 at webprd-m65.mail.aol.com <mailto:14bbe06bbd3-d97-1184 at webprd-m65.mail.aol.com>>
> > Content-Type: text/plain; charset="utf-8"
> >
> > Always stirring up trouble!
> >
> > If it ain't a barrel roll, and it ain't an axial roll, it must be a snap roll. Best definition I ever heard for what is REALLY done in AMA and FAI.
> >
> >
> > Now we'll start hearing a whole bunch of BS about stalled conditions, departure from straight and level, etc etc.
> >
> > I'll shut up now.....
> >
> > Jon
> >
> > On Tuesday, February 24, 2015 Ronald Van Putte via NSRCA-discussion <nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>> wrote:
> >
> > Please remember that I warned about a potential ?holy war? if we started discussing arming plugs.
> >
> >
> > Let?s talk about snap rolls or something else that?s not controversial. ?I kinda think that the ?flick snaps? in F3A are really neat and the pilots whose airplanes perform the snaps in which the tail cones all around should be severely downgraded..
> >
> >
> > Ron Van Putte
> >
> >
> > On Feb 24, 2015, at 3:15 PM, Matthew Finley via NSRCA-discussion < nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>> wrote:
> >
> >
> > I know, I thought before this thread was over we would be going back to one piece wings, single aileron and tail servos, and non computerized tx's lol?
> >
> >
> > Sent from my T-Mobile 4G LTE Device
> >
> >
> >
> > -------- Original message --------
> > From: Ed Alt via NSRCA-discussion < nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org> >?
> > Date: 02/24/2015 4:10 PM (GMT-05:00)?
> > To:? jpavlick at idseng.com <mailto:jpavlick at idseng.com> , John Pavlick < jpavlick26 at att.net <mailto:jpavlick26 at att.net> >, General pattern discussion < nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org> >?
> > Subject: Re: [NSRCA-discussion] Matt Finley ( Arming Plug )?
> >
> > I know. ?This effectively kills the idea for an automatic, electronic rag thrower.
> >
> >
> >
> > On Feb 24, 2015, at 4:09 PM, John Pavlick via NSRCA-discussion < nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>> wrote:
> >
> > Be careful, you just made WAY too much sense! LOL
> >
> > ?
> >
> > John Pavlick
> >
> > Cell: 203-417-4971
> >
> > ?
> >
> > <image001.png>
> >
> > Integrated Development Services
> >
> > ?
> >
> > From: ?NSRCA-discussion [mailto:nsrca-discussion-bounces at lists.nsrca.org <mailto:nsrca-discussion-bounces at lists.nsrca.org>]?On Behalf Of?John Gayer via NSRCA-discussion
> > Sent:?Tuesday, February 24, 2015 3:53 PM
> > To:?General pattern discussion
> > Subject:?Re: [NSRCA-discussion] Matt Finley ( Arming Plug )
> >
> > ?
> >
> > An arming plug was never intended to be the cure-all for all electric safety issues. I consider it a baseline that is easy to comply with. All the anecdotal evidence in the world that each responder to this list is safe does not help establish a minimum set of standards. Each one of you has a good process that works for you. Each one of those processes could be easily amended to incorporate an arming plug if it doesn't already.
> > It isn't those with a good process that are the safety problem. It's the neophyte that hears the experienced pilot expound on why he is safe without an arming plug because he does everything else right. The beginner doesn't hear or doesn't understand all the issues with setting up failsafe, throttle cut, arming conditions, thumb on throttle stick that are part of that process of achieving safe operations in the pits and on the runway whether you have an arming plug or not.
> > I have seen models without arming plugs, without external receiver switches and canopies that require two hands to remove. Last time I checked failsafe operation at a contest, full throttle kill was running about 50%. Most of the remaining were simply going to hold which doesn't help at all if you already have a problem. Eventually a setup like that will cause a disaster.
> > An arming plug is a small thing to add. It can be done lightly, cheaply and reliably. It provides a visual indication to all that the motor/ESC is unpowered. It is not dependent on any other function in the model to operate.?
> > John
> >
> > On 2/23/2015 10:49 PM, Steve Hannah via NSRCA-discussion wrote:
> >
> > I agree 100% with Jerry.?
> >
> > ?
> >
> > The multiple throttle kill approach is the best. I have seen the same things as Jerry. The best safety approach is always a multi-pronged solution.?
> >
> > ?
> >
> > I use a slider to drop the throttle below arming level and a switch to nullify the throttle stick. Then, for added security I always hold the stick down with my thumb as my caller/helper retrieves the plane. They usually don't turn off the receiver so I assume my plane is live until I prove otherwise and shut it down. ?
> >
> > ?
> >
> > An external plug is one way, but I fail to see how it provides any more safety than my method. Switching it off from my transmitter and disabling the throttle stick are very secure means and I know the ESC has been shut down. I don't rely on a person to pull a plug.?
> >
> > ?
> >
> > Along with that, proving you have a failsafe is a reasonable request and shouldn't be an issue for anyone.?
> >
> > ?
> >
> >
> > On Feb 23, 2015, at 08:50, Budd Engineering via NSRCA-discussion <nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>> wrote:
> >
> > At nearly every contest I've attended since I started flying electric in pattern (the 2004 Nats in Masters) I've seen at least one occurrence where someone retrieved a plane without removing an arming plug first. ?Usually the pilot reminds the person to do it while they're carrying the plane back or as they're setting it down somewhere. ?It happens with my planes too and I make sure they switch the receiver off and then I remove my canopy and disconnect the battery directly. ?But before they even get that far I've taken the other steps to make sure there's virtually no chance the motor is going to run.
> >
> > ?
> >
> > My point is this. ?A layered approach is the only way I've found to effectively mitigate this particular risk to the levels of safety that you claim. ?Relying on someone to remove an arming plug is not a complete panacea and may lend a false sense of security that the motor system has been de-energized, when in fact it may not have been. ?There's many ways to manage the risk to the desired level, the use of an arming plug is one, and may not necessarily be the best.
> >
> > ?
> >
> > Jerry
> >
> > Sent from my iPhone
> >
> >
> > On Feb 23, 2015, at 5:29 AM, Matthew Finley via NSRCA-discussion <nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>> wrote:
> >
> > I use the Ultra Deans stlye Arming Plug from F3A Unlimited, and?It works very well. I would gather?it provides you with a 99 % dagree of confidence that your caller?, plane carrier , yourself, or anyone else will not be harmed. Yes... I do agree that there is a miniscuel chance that a pilot / caller could forget to unplug the safety, however I feel most pilots that have been doing it a while is like tying your shoes, or etc.... On all of my electrics except for indoor ships, I have some sort of disconnect. I for one would like to see it an inforced rule at all sanctioned meets not just pattern meets,?that any plane over a certain size or weight must have one in order to fly. Just my three pennies?
> >
> >
> > Matthew E. Finley
> > QCI - Technology Assistant
> > 614-557-3846 Mobile
> > mfinley at quadcityinnovations.com <mailto:mfinley at quadcityinnovations.com> ?
> >
> > ? ?
> >
> > _______________________________________________
> > NSRCA-discussion mailing list
> > NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>
> > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>
> >
> > _______________________________________________
> > NSRCA-discussion mailing list
> > NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>
> > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>
> >
> >
> >
> >
> > _______________________________________________ NSRCA-discussion mailing list NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>
> >
> > ?
> >
> > _______________________________________________
> > NSRCA-discussion mailing list
> > NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>
> > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>
> >
> > <Mail Attachment.txt> _______________________________________________
> > NSRCA-discussion mailing list
> > NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>
> > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>
> >
> >
> > _______________________________________________ NSRCA-discussion mailing list NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20150224/9a0abc72/attachment-0001.html <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20150224/9a0abc72/attachment-0001.html>>
> >
> > ------------------------------
> >
> > Message: 6
> > Date: Tue, 24 Feb 2015 16:02:55 -0800
> > From: Peter Vogel <vogel.peter at gmail.com <mailto:vogel.peter at gmail.com>>
> > To: Jon Lowe <jonlowe at aol.com <mailto:jonlowe at aol.com>>, General pattern discussion
> > <nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>>
> > Subject: Re: [NSRCA-discussion] Fwd: Matt Finley ( Arming Plug )
> > Message-ID:
> > <CAGBB6kKo0NUsmHrdnrSAmqFrhcXF7cWLufwB_CVEv76CmO7MHw at mail.gmail.com <mailto:CAGBB6kKo0NUsmHrdnrSAmqFrhcXF7cWLufwB_CVEv76CmO7MHw at mail.gmail.com>>
> > Content-Type: text/plain; charset="utf-8"
> >
> > NOT THE WAY I FLY! My airplane is protected from snap roll errors by a
> > foolproof safety system that involves ensuring that I enter and exit snap
> > mode only if I stand on one leg while my caller calls the and rests his/her
> > hand on my shoulder whispering "snap mode" in my ear, I then touch my ear
> > twice in just the right way before flipping the switch on my transmitter.
> > Exiting snap condition is the exact opposite, I touch my ear twice and my
> > caller whispers "exit snap mode", I then return to a two-legged stance and
> > flip the switch on my transmitter. With this absolutely foolproof safety
> > system I am ensured of getting 10's on every snap I do.
> >
> > Peter+
> >
> > On Tue, Feb 24, 2015 at 3:58 PM, Jon Lowe via NSRCA-discussion <
> > nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>> wrote:
> >
> > > Always stirring up trouble!
> > >
> > > If it ain't a barrel roll, and it ain't an axial roll, it must be a snap
> > > roll. Best definition I ever heard for what is REALLY done in AMA and FAI.
> > >
> > > Now we'll start hearing a whole bunch of BS about stalled conditions,
> > > departure from straight and level, etc etc.
> > >
> > > I'll shut up now.....
> > >
> > > Jon
> > > ------------------------------
> > > On Tuesday, February 24, 2015 Ronald Van Putte via NSRCA-discussion <
> > > nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>> wrote:
> > > Please remember that I warned about a potential ?holy war? if we started
> > > discussing arming plugs.
> > >
> > > Let?s talk about snap rolls or something else that?s not controversial.
> > > I kinda think that the ?flick snaps? in F3A are really neat and the pilots
> > > whose airplanes perform the snaps in which the tail cones all around should
> > > be severely downgraded..
> > >
> > > Ron Van Putte
> > >
> > > On Feb 24, 2015, at 3:15 PM, Matthew Finley via NSRCA-discussion <
> > > nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>> wrote:
> > >
> > > I know, I thought before this thread was over we would be going back to
> > > one piece wings, single aileron and tail servos, and non computerized tx's
> > > lol
> > >
> > > Sent from my T-Mobile 4G LTE Device
> > >
> > >
> > > -------- Original message --------
> > > From: Ed Alt via NSRCA-discussion < nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org> >
> > > Date: 02/24/2015 4:10 PM (GMT-05:00)
> > > To: jpavlick at idseng.com <mailto:jpavlick at idseng.com> , John Pavlick < jpavlick26 at att.net <mailto:jpavlick26 at att.net> >, General
> > > pattern discussion < nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org> >
> > > Subject: Re: [NSRCA-discussion] Matt Finley ( Arming Plug )
> > >
> > > I know. This effectively kills the idea for an automatic, electronic
> > > rag thrower.
> > >
> > >
> > >
> > > On Feb 24, 2015, at 4:09 PM, John Pavlick via NSRCA-discussion <
> > > nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>> wrote:
> > >
> > > Be careful, you just made WAY too much sense! LOL
> > >
> > >
> > > John Pavlick
> > > Cell: 203-417-4971
> > >
> > >
> > > <image001.png>
> > > Integrated Development Services
> > >
> > >
> > > *From:* NSRCA-discussion [
> > > mailto:nsrca-discussion-bounces at lists.nsrca.org <mailto:nsrca-discussion-bounces at lists.nsrca.org>
> > > <nsrca-discussion-bounces at lists.nsrca.org <mailto:nsrca-discussion-bounces at lists.nsrca.org>>] *On Behalf Of *John Gayer via
> > > NSRCA-discussion
> > > *Sent:* Tuesday, February 24, 2015 3:53 PM
> > > *To:* General pattern discussion
> > > *Subject:* Re: [NSRCA-discussion] Matt Finley ( Arming Plug )
> > >
> > >
> > >
> > > An arming plug was never intended to be the cure-all for all electric
> > > safety issues. I consider it a baseline that is easy to comply with. All
> > > the anecdotal evidence in the world that each responder to this list is
> > > safe does not help establish a minimum set of standards. Each one of you
> > > has a good process that works for you. Each one of those processes could be
> > > easily amended to incorporate an arming plug if it doesn't already.
> > > It isn't those with a good process that are the safety problem. It's the
> > > neophyte that hears the experienced pilot expound on why he is safe without
> > > an arming plug because he does everything else right. The beginner doesn't
> > > hear or doesn't understand all the issues with setting up failsafe,
> > > throttle cut, arming conditions, thumb on throttle stick that are part of
> > > that process of achieving safe operations in the pits and on the runway
> > > whether you have an arming plug or not.
> > > I have seen models without arming plugs, without external receiver
> > > switches and canopies that require two hands to remove. Last time I checked
> > > failsafe operation at a contest, full throttle kill was running about 50%.
> > > Most of the remaining were simply going to hold which doesn't help at all
> > > if you already have a problem. Eventually a setup like that will cause a
> > > disaster.
> > > An arming plug is a small thing to add. It can be done lightly, cheaply
> > > and reliably. It provides a visual indication to all that the motor/ESC is
> > > unpowered. It is not dependent on any other function in the model to
> > > operate.
> > > John
> > > On 2/23/2015 10:49 PM, Steve Hannah via NSRCA-discussion wrote:
> > >
> > > I agree 100% with Jerry.
> > >
> > >
> > > The multiple throttle kill approach is the best. I have seen the same
> > > things as Jerry. The best safety approach is always a multi-pronged
> > > solution.
> > >
> > >
> > > I use a slider to drop the throttle below arming level and a switch to
> > > nullify the throttle stick. Then, for added security I always hold the
> > > stick down with my thumb as my caller/helper retrieves the plane. They
> > > usually don't turn off the receiver so I assume my plane is live until I
> > > prove otherwise and shut it down.
> > >
> > >
> > > An external plug is one way, but I fail to see how it provides any more
> > > safety than my method. Switching it off from my transmitter and disabling
> > > the throttle stick are very secure means and I know the ESC has been shut
> > > down. I don't rely on a person to pull a plug.
> > >
> > >
> > >
> > > Along with that, proving you have a failsafe is a reasonable request and
> > > shouldn't be an issue for anyone.
> > >
> > >
> > >
> > >
> > > On Feb 23, 2015, at 08:50, Budd Engineering via NSRCA-discussion <
> > > nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>> wrote:
> > >
> > > At nearly every contest I've attended since I started flying electric
> > > in pattern (the 2004 Nats in Masters) I've seen at least one occurrence
> > > where someone retrieved a plane without removing an arming plug first.
> > > Usually the pilot reminds the person to do it while they're carrying the
> > > plane back or as they're setting it down somewhere. It happens with my
> > > planes too and I make sure they switch the receiver off and then I remove
> > > my canopy and disconnect the battery directly. But before they even get
> > > that far I've taken the other steps to make sure there's virtually no
> > > chance the motor is going to run.
> > >
> > >
> > > My point is this. A layered approach is the only way I've found to
> > > effectively mitigate this particular risk to the levels of safety that you
> > > claim. Relying on someone to remove an arming plug is not a complete
> > > panacea and may lend a false sense of security that the motor system has
> > > been de-energized, when in fact it may not have been. There's many ways to
> > > manage the risk to the desired level, the use of an arming plug is one, and
> > > may not necessarily be the best.
> > >
> > >
> > > Jerry
> > >
> > > Sent from my iPhone
> > >
> > >
> > > On Feb 23, 2015, at 5:29 AM, Matthew Finley via NSRCA-discussion <
> > > nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>> wrote:
> > >
> > >
> > > *I use the Ultra Deans stlye Arming Plug from F3A Unlimited, and It works
> > > very well. I would gather it provides you with a 99 % dagree of confidence
> > > that your caller , plane carrier , yourself, or anyone else will not be
> > > harmed. Yes... I do agree that there is a miniscuel chance that a pilot /
> > > caller could forget to unplug the safety, however I feel most pilots that
> > > have been doing it a while is like tying your shoes, or etc.... On all of
> > > my electrics except for indoor ships, I have some sort of disconnect. I for
> > > one would like to see it an inforced rule at all sanctioned meets not just
> > > pattern meets, that any plane over a certain size or weight must have one
> > > in order to fly. Just my three pennies *
> > >
> > > *Matthew E. Finley*
> > > QCI - Technology Assistant
> > > 614-557-3846 Mobile
> > > mfinley at quadcityinnovations.com <mailto:mfinley at quadcityinnovations.com>
> > >
> > >
> > >
> > > _______________________________________________
> > > NSRCA-discussion mailing list
> > > NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>
> > > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>
> > >
> > > _______________________________________________
> > > NSRCA-discussion mailing list
> > > NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>
> > > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>
> > >
> > >
> > >
> > >
> > > _______________________________________________
> > >
> > > NSRCA-discussion mailing list
> > >
> > > NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>
> > >
> > > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>
> > >
> > >
> > >
> > > _______________________________________________
> > > NSRCA-discussion mailing list
> > > NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>
> > > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>
> > >
> > > <Mail Attachment.txt> _______________________________________________
> > > NSRCA-discussion mailing list
> > > NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>
> > > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>
> > >
> > >
> > > _______________________________________________ NSRCA-discussion mailing
> > > list NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>
> > > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>
> > >
> > > _______________________________________________
> > > NSRCA-discussion mailing list
> > > NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>
> > > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>
> > >
> >
> >
> >
> > --
> > Director, Fixed Wing Flight Training
> > Santa Clara County Model Aircraft Skypark
> > Associate Vice President, Academy of Model Aeronautics District X
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20150224/f00cfbde/attachment.html <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20150224/f00cfbde/attachment.html>>
> >
> > ------------------------------
> >
> > Message: 7
> > Date: Tue, 24 Feb 2015 19:10:41 -0500
> > From: "John Pavlick" <jpavlick26 at att.net <mailto:jpavlick26 at att.net>>
> > To: "'General pattern discussion'" <nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>>
> > Subject: Re: [NSRCA-discussion] Fwd: Matt Finley ( Arming Plug )
> > Message-ID: <053601d0508f$7fdc8c10$7f95a430$@net>
> > Content-Type: text/plain; charset="utf-8"
> >
> > Ya see, we don?t have this problem in slot-car racing (that?s what I?ve been doing since I took a break from Pattern). The only ?judging? is for the 3 best looking cars in each class. Then it?s PURE COMPETITION. Best of all, it?s REALLY easy to figure out who won: the lap-counter doesn?t lie. J
> >
> >
> >
> > John Pavlick
> >
> > Cell: 203-417-4971
> >
> >
> >
> > idslogo2
> >
> > Integrated Development Services
> >
> >
> >
> > From: NSRCA-discussion [mailto:nsrca-discussion-bounces at lists.nsrca.org <mailto:nsrca-discussion-bounces at lists.nsrca.org>] On Behalf Of Jon Lowe via NSRCA-discussion
> > Sent: Tuesday, February 24, 2015 6:58 PM
> > To: nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>
> > Subject: Re: [NSRCA-discussion] Fwd: Matt Finley ( Arming Plug )
> >
> >
> >
> > Always stirring up trouble!
> >
> > If it ain't a barrel roll, and it ain't an axial roll, it must be a snap roll. Best definition I ever heard for what is REALLY done in AMA and FAI.
> >
> > Now we'll start hearing a whole bunch of BS about stalled conditions, departure from straight and level, etc etc.
> >
> > I'll shut up now.....
> >
> > Jon
> >
> > _____
> >
> > On Tuesday, February 24, 2015 Ronald Van Putte via NSRCA-discussion <nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>> wrote:
> >
> > Please remember that I warned about a potential ?holy war? if we started discussing arming plugs.
> >
> >
> >
> > Let?s talk about snap rolls or something else that?s not controversial. I kinda think that the ?flick snaps? in F3A are really neat and the pilots whose airplanes perform the snaps in which the tail cones all around should be severely downgraded..
> >
> >
> >
> > Ron Van Putte
> >
> >
> >
> > On Feb 24, 2015, at 3:15 PM, Matthew Finley via NSRCA-discussion < nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>> wrote:
> >
> >
> >
> > I know, I thought before this thread was over we would be going back to one piece wings, single aileron and tail servos, and non computerized tx's lol
> >
> >
> >
> > Sent from my T-Mobile 4G LTE Device
> >
> >
> >
> > -------- Original message --------
> > From: Ed Alt via NSRCA-discussion < <mailto:nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>> nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org> >
> > Date: 02/24/2015 4:10 PM (GMT-05:00)
> > To: <mailto:jpavlick at idseng.com <mailto:jpavlick at idseng.com>> jpavlick at idseng.com <mailto:jpavlick at idseng.com> , John Pavlick < <mailto:jpavlick26 at att.net <mailto:jpavlick26 at att.net>> jpavlick26 at att.net <mailto:jpavlick26 at att.net> >, General pattern discussion < <mailto:nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>> nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org> >
> > Subject: Re: [NSRCA-discussion] Matt Finley ( Arming Plug )
> >
> >
> >
> > I know. This effectively kills the idea for an automatic, electronic rag thrower.
> >
> >
> >
> >
> > On Feb 24, 2015, at 4:09 PM, John Pavlick via NSRCA-discussion < nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>> wrote:
> >
> > Be careful, you just made WAY too much sense! LOL
> >
> >
> >
> > John Pavlick
> >
> > Cell: 203-417-4971
> >
> >
> >
> > <image001.png>
> >
> > Integrated Development Services
> >
> >
> >
> > From: NSRCA-discussion [mailto:nsrca-discussion-bounces at lists.nsrca.org <mailto:nsrca-discussion-bounces at lists.nsrca.org>] On Behalf Of John Gayer via NSRCA-discussion
> > Sent: Tuesday, February 24, 2015 3:53 PM
> > To: General pattern discussion
> > Subject: Re: [NSRCA-discussion] Matt Finley ( Arming Plug )
> >
> >
> >
> > An arming plug was never intended to be the cure-all for all electric safety issues. I consider it a baseline that is easy to comply with. All the anecdotal evidence in the world that each responder to this list is safe does not help establish a minimum set of standards. Each one of you has a good process that works for you. Each one of those processes could be easily amended to incorporate an arming plug if it doesn't already.
> > It isn't those with a good process that are the safety problem. It's the neophyte that hears the experienced pilot expound on why he is safe without an arming plug because he does everything else right. The beginner doesn't hear or doesn't understand all the issues with setting up failsafe, throttle cut, arming conditions, thumb on throttle stick that are part of that process of achieving safe operations in the pits and on the runway whether you have an arming plug or not.
> > I have seen models without arming plugs, without external receiver switches and canopies that require two hands to remove. Last time I checked failsafe operation at a contest, full throttle kill was running about 50%. Most of the remaining were simply going to hold which doesn't help at all if you already have a problem. Eventually a setup like that will cause a disaster.
> > An arming plug is a small thing to add. It can be done lightly, cheaply and reliably. It provides a visual indication to all that the motor/ESC is unpowered. It is not dependent on any other function in the model to operate.
> > John
> >
> > On 2/23/2015 10:49 PM, Steve Hannah via NSRCA-discussion wrote:
> >
> > I agree 100% with Jerry.
> >
> >
> >
> > The multiple throttle kill approach is the best. I have seen the same things as Jerry. The best safety approach is always a multi-pronged solution.
> >
> >
> >
> > I use a slider to drop the throttle below arming level and a switch to nullify the throttle stick. Then, for added security I always hold the stick down with my thumb as my caller/helper retrieves the plane. They usually don't turn off the receiver so I assume my plane is live until I prove otherwise and shut it down.
> >
> >
> >
> > An external plug is one way, but I fail to see how it provides any more safety than my method. Switching it off from my transmitter and disabling the throttle stick are very secure means and I know the ESC has been shut down. I don't rely on a person to pull a plug.
> >
> >
> >
> > Along with that, proving you have a failsafe is a reasonable request and shouldn't be an issue for anyone.
> >
> >
> >
> >
> > On Feb 23, 2015, at 08:50, Budd Engineering via NSRCA-discussion <nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>> wrote:
> >
> > At nearly every contest I've attended since I started flying electric in pattern (the 2004 Nats in Masters) I've seen at least one occurrence where someone retrieved a plane without removing an arming plug first. Usually the pilot reminds the person to do it while they're carrying the plane back or as they're setting it down somewhere. It happens with my planes too and I make sure they switch the receiver off and then I remove my canopy and disconnect the battery directly. But before they even get that far I've taken the other steps to make sure there's virtually no chance the motor is going to run.
> >
> >
> >
> > My point is this. A layered approach is the only way I've found to effectively mitigate this particular risk to the levels of safety that you claim. Relying on someone to remove an arming plug is not a complete panacea and may lend a false sense of security that the motor system has been de-energized, when in fact it may not have been. There's many ways to manage the risk to the desired level, the use of an arming plug is one, and may not necessarily be the best.
> >
> >
> >
> > Jerry
> >
> > Sent from my iPhone
> >
> >
> > On Feb 23, 2015, at 5:29 AM, Matthew Finley via NSRCA-discussion <nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>> wrote:
> >
> > I use the Ultra Deans stlye Arming Plug from F3A Unlimited, and It works very well. I would gather it provides you with a 99 % dagree of confidence that your caller , plane carrier , yourself, or anyone else will not be harmed. Yes... I do agree that there is a miniscuel chance that a pilot / caller could forget to unplug the safety, however I feel most pilots that have been doing it a while is like tying your shoes, or etc.... On all of my electrics except for indoor ships, I have some sort of disconnect. I for one would like to see it an inforced rule at all sanctioned meets not just pattern meets, that any plane over a certain size or weight must have one in order to fly. Just my three pennies
> >
> >
> > Matthew E. Finley
> > QCI - Technology Assistant
> > 614-557-3846 Mobile
> > mfinley at quadcityinnovations.com <mailto:mfinley at quadcityinnovations.com>
> >
> >
> >
> > _______________________________________________
> > NSRCA-discussion mailing list
> > NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>
> > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>
> >
> > _______________________________________________
> > NSRCA-discussion mailing list
> > NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>
> > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>
> >
> >
> >
> >
> >
> > _______________________________________________
> > NSRCA-discussion mailing list
> > NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>
> > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>
> >
> >
> >
> > _______________________________________________
> > NSRCA-discussion mailing list
> > NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>
> > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>
> >
> > <Mail Attachment.txt> _______________________________________________
> > NSRCA-discussion mailing list
> > <mailto:NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>> NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>
> > <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>
> >
> >
> >
> > _______________________________________________ NSRCA-discussion mailing list NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>
> >
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20150224/8ead43f3/attachment.html <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20150224/8ead43f3/attachment.html>>
> > -------------- next part --------------
> > A non-text attachment was scrubbed...
> > Name: image001.png
> > Type: image/png
> > Size: 735 bytes
> > Desc: not available
> > URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20150224/8ead43f3/attachment.png <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20150224/8ead43f3/attachment.png>>
> >
> > ------------------------------
> >
> > Message: 8
> > Date: Tue, 24 Feb 2015 19:20:24 -0500
> > From: "John Pavlick" <jpavlick26 at att.net <mailto:jpavlick26 at att.net>>
> > To: "'Peter Vogel'" <vogel.peter at gmail.com <mailto:vogel.peter at gmail.com>>, "'General pattern
> > discussion'" <nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>>
> > Subject: Re: [NSRCA-discussion] Fwd: Matt Finley ( Arming Plug )
> > Message-ID: <055101d05090$dbb92100$932b6300$@net>
> > Content-Type: text/plain; charset="utf-8"
> >
> > Sweet ? I?ll have to try your system. I?ve NEVER gotten a 10 on a snap. The best I ever got was a 9 - but I don?t use any ?conditions? or ?buttons? either. I just fly it completely through with the sticks. Is that what I?m doing wrong? LOL
> >
> >
> >
> > John Pavlick
> >
> > Cell: 203-417-4971
> >
> >
> >
> > idslogo2
> >
> > Integrated Development Services
> >
> >
> >
> > From: NSRCA-discussion [mailto:nsrca-discussion-bounces at lists.nsrca.org <mailto:nsrca-discussion-bounces at lists.nsrca.org>] On Behalf Of Peter Vogel via NSRCA-discussion
> > Sent: Tuesday, February 24, 2015 7:03 PM
> > To: Jon Lowe; General pattern discussion
> > Subject: Re: [NSRCA-discussion] Fwd: Matt Finley ( Arming Plug )
> >
> >
> >
> > NOT THE WAY I FLY! My airplane is protected from snap roll errors by a foolproof safety system that involves ensuring that I enter and exit snap mode only if I stand on one leg while my caller calls the and rests his/her hand on my shoulder whispering "snap mode" in my ear, I then touch my ear twice in just the right way before flipping the switch on my transmitter. Exiting snap condition is the exact opposite, I touch my ear twice and my caller whispers "exit snap mode", I then return to a two-legged stance and flip the switch on my transmitter. With this absolutely foolproof safety system I am ensured of getting 10's on every snap I do.
> >
> >
> >
> > Peter+
> >
> >
> >
> > On Tue, Feb 24, 2015 at 3:58 PM, Jon Lowe via NSRCA-discussion <nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>> wrote:
> >
> > Always stirring up trouble!
> >
> > If it ain't a barrel roll, and it ain't an axial roll, it must be a snap roll. Best definition I ever heard for what is REALLY done in AMA and FAI.
> >
> > Now we'll start hearing a whole bunch of BS about stalled conditions, departure from straight and level, etc etc.
> >
> > I'll shut up now.....
> >
> > Jon
> >
> > _____
> >
> > On Tuesday, February 24, 2015 Ronald Van Putte via NSRCA-discussion <nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>> wrote:
> >
> > Please remember that I warned about a potential ?holy war? if we started discussing arming plugs.
> >
> >
> >
> > Let?s talk about snap rolls or something else that?s not controversial. I kinda think that the ?flick snaps? in F3A are really neat and the pilots whose airplanes perform the snaps in which the tail cones all around should be severely downgraded..
> >
> >
> >
> > Ron Van Putte
> >
> >
> >
> > On Feb 24, 2015, at 3:15 PM, Matthew Finley via NSRCA-discussion < nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>> wrote:
> >
> >
> >
> > I know, I thought before this thread was over we would be going back to one piece wings, single aileron and tail servos, and non computerized tx's lol
> >
> >
> >
> > Sent from my T-Mobile 4G LTE Device
> >
> >
> >
> > -------- Original message --------
> > From: Ed Alt via NSRCA-discussion < <mailto:nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>> nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org> >
> > Date: 02/24/2015 4:10 PM (GMT-05:00)
> >
> > To: <mailto:jpavlick at idseng.com <mailto:jpavlick at idseng.com>> jpavlick at idseng.com <mailto:jpavlick at idseng.com> , John Pavlick < <mailto:jpavlick26 at att.net <mailto:jpavlick26 at att.net>> jpavlick26 at att.net <mailto:jpavlick26 at att.net> >, General pattern discussion < <mailto:nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>> nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org> >
> > Subject: Re: [NSRCA-discussion] Matt Finley ( Arming Plug )
> >
> >
> >
> > I know. This effectively kills the idea for an automatic, electronic rag thrower.
> >
> >
> >
> >
> > On Feb 24, 2015, at 4:09 PM, John Pavlick via NSRCA-discussion < nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>> wrote:
> >
> > Be careful, you just made WAY too much sense! LOL
> >
> >
> >
> > John Pavlick
> >
> > Cell: 203-417-4971
> >
> >
> >
> > <image001.png>
> >
> > Integrated Development Services
> >
> >
> >
> > From: NSRCA-discussion [mailto:nsrca-discussion-bounces at lists.nsrca.org <mailto:nsrca-discussion-bounces at lists.nsrca.org>] On Behalf Of John Gayer via NSRCA-discussion
> > Sent: Tuesday, February 24, 2015 3:53 PM
> > To: General pattern discussion
> > Subject: Re: [NSRCA-discussion] Matt Finley ( Arming Plug )
> >
> >
> >
> > An arming plug was never intended to be the cure-all for all electric safety issues. I consider it a baseline that is easy to comply with. All the anecdotal evidence in the world that each responder to this list is safe does not help establish a minimum set of standards. Each one of you has a good process that works for you. Each one of those processes could be easily amended to incorporate an arming plug if it doesn't already.
> > It isn't those with a good process that are the safety problem. It's the neophyte that hears the experienced pilot expound on why he is safe without an arming plug because he does everything else right. The beginner doesn't hear or doesn't understand all the issues with setting up failsafe, throttle cut, arming conditions, thumb on throttle stick that are part of that process of achieving safe operations in the pits and on the runway whether you have an arming plug or not.
> > I have seen models without arming plugs, without external receiver switches and canopies that require two hands to remove. Last time I checked failsafe operation at a contest, full throttle kill was running about 50%. Most of the remaining were simply going to hold which doesn't help at all if you already have a problem. Eventually a setup like that will cause a disaster.
> > An arming plug is a small thing to add. It can be done lightly, cheaply and reliably. It provides a visual indication to all that the motor/ESC is unpowered. It is not dependent on any other function in the model to operate.
> > John
> >
> > On 2/23/2015 10:49 PM, Steve Hannah via NSRCA-discussion wrote:
> >
> > I agree 100% with Jerry.
> >
> >
> >
> > The multiple throttle kill approach is the best. I have seen the same things as Jerry. The best safety approach is always a multi-pronged solution.
> >
> >
> >
> > I use a slider to drop the throttle below arming level and a switch to nullify the throttle stick. Then, for added security I always hold the stick down with my thumb as my caller/helper retrieves the plane. They usually don't turn off the receiver so I assume my plane is live until I prove otherwise and shut it down.
> >
> >
> >
> > An external plug is one way, but I fail to see how it provides any more safety than my method. Switching it off from my transmitter and disabling the throttle stick are very secure means and I know the ESC has been shut down. I don't rely on a person to pull a plug.
> >
> >
> >
> > Along with that, proving you have a failsafe is a reasonable request and shouldn't be an issue for anyone.
> >
> >
> >
> >
> > On Feb 23, 2015, at 08:50, Budd Engineering via NSRCA-discussion <nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>> wrote:
> >
> > At nearly every contest I've attended since I started flying electric in pattern (the 2004 Nats in Masters) I've seen at least one occurrence where someone retrieved a plane without removing an arming plug first. Usually the pilot reminds the person to do it while they're carrying the plane back or as they're setting it down somewhere. It happens with my planes too and I make sure they switch the receiver off and then I remove my canopy and disconnect the battery directly. But before they even get that far I've taken the other steps to make sure there's virtually no chance the motor is going to run.
> >
> >
> >
> > My point is this. A layered approach is the only way I've found to effectively mitigate this particular risk to the levels of safety that you claim. Relying on someone to remove an arming plug is not a complete panacea and may lend a false sense of security that the motor system has been de-energized, when in fact it may not have been. There's many ways to manage the risk to the desired level, the use of an arming plug is one, and may not necessarily be the best.
> >
> >
> >
> > Jerry
> >
> > Sent from my iPhone
> >
> >
> > On Feb 23, 2015, at 5:29 AM, Matthew Finley via NSRCA-discussion <nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>> wrote:
> >
> > I use the Ultra Deans stlye Arming Plug from F3A Unlimited, and It works very well. I would gather it provides you with a 99 % dagree of confidence that your caller , plane carrier , yourself, or anyone else will not be harmed. Yes... I do agree that there is a miniscuel chance that a pilot / caller could forget to unplug the safety, however I feel most pilots that have been doing it a while is like tying your shoes, or etc.... On all of my electrics except for indoor ships, I have some sort of disconnect. I for one would like to see it an inforced rule at all sanctioned meets not just pattern meets, that any plane over a certain size or weight must have one in order to fly. Just my three pennies
> >
> >
> > Matthew E. Finley
> > QCI - Technology Assistant
> > 614-557-3846 Mobile
> > mfinley at quadcityinnovations.com <mailto:mfinley at quadcityinnovations.com>
> >
> >
> >
> > _______________________________________________
> > NSRCA-discussion mailing list
> > NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>
> > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>
> >
> > _______________________________________________
> > NSRCA-discussion mailing list
> > NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>
> > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>
> >
> >
> >
> >
> >
> > _______________________________________________
> > NSRCA-discussion mailing list
> > NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>
> > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>
> >
> >
> >
> > _______________________________________________
> > NSRCA-discussion mailing list
> > NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>
> > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>
> >
> > <Mail Attachment.txt> _______________________________________________
> > NSRCA-discussion mailing list
> > <mailto:NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>> NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>
> > <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>
> >
> >
> >
> > _______________________________________________ NSRCA-discussion mailing list NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>
> >
> >
> > _______________________________________________
> > NSRCA-discussion mailing list
> > NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>
> > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>
> >
> >
> >
> >
> >
> >
> >
> > --
> >
> > Director, Fixed Wing Flight Training
> >
> > Santa Clara County Model Aircraft Skypark
> >
> > Associate Vice President, Academy of Model Aeronautics District X
> >
> > <http://farm8.staticflickr.com/7163/6513778381_5569cc985d_m.jpg <http://farm8.staticflickr.com/7163/6513778381_5569cc985d_m.jpg>> <https://googledrive.com/host/0B4LOPeyGAgOJUVJmU1dJMVl6WWc/AcademyModelAeronauticsLogo.png <https://googledrive.com/host/0B4LOPeyGAgOJUVJmU1dJMVl6WWc/AcademyModelAeronauticsLogo.png>>
> >
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20150224/0baf2d4f/attachment.html <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20150224/0baf2d4f/attachment.html>>
> > -------------- next part --------------
> > A non-text attachment was scrubbed...
> > Name: image001.png
> > Type: image/png
> > Size: 735 bytes
> > Desc: not available
> > URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20150224/0baf2d4f/attachment.png <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20150224/0baf2d4f/attachment.png>>
> >
> > ------------------------------
> >
> > Message: 9
> > Date: Tue, 24 Feb 2015 18:37:21 -0600
> > From: Ronald Van Putte <vanputte at cox.net <mailto:vanputte at cox.net>>
> > To: General pattern discussion <nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>>
> > Subject: Re: [NSRCA-discussion] Fwd: Matt Finley ( Arming Plug )
> > Message-ID: <70BBE16E-5C31-4878-85CD-86EAA867892B at cox.net <mailto:70BBE16E-5C31-4878-85CD-86EAA867892B at cox.net>>
> > Content-Type: text/plain; charset="utf-8"
> >
> > Well, that?s one of us.
> >
> > Let the fun begin.
> >
> > Ron
> >
> > > On Feb 24, 2015, at 5:58 PM, Jon Lowe via NSRCA-discussion <nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>> wrote:
> > >
> > > Always stirring up trouble!
> > >
> > > If it ain't a barrel roll, and it ain't an axial roll, it must be a snap roll. Best definition I ever heard for what is REALLY done in AMA and FAI.
> > >
> > >
> > > Now we'll start hearing a whole bunch of BS about stalled conditions, departure from straight and level, etc etc.
> > >
> > > I'll shut up now.....
> > >
> > > Jon
> > >
> > >
> > >
> > > On Tuesday, February 24, 2015 Ronald Van Putte via NSRCA-discussion <nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>> wrote:
> > >
> > > Please remember that I warned about a potential ?holy war? if we started discussing arming plugs.
> > >
> > > Let?s talk about snap rolls or something else that?s not controversial. I kinda think that the ?flick snaps? in F3A are really neat and the pilots whose airplanes perform the snaps in which the tail cones all around should be severely downgraded..
> > >
> > > Ron Van Putte
> > >
> > > On Feb 24, 2015, at 3:15 PM, Matthew Finley via NSRCA-discussion < nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org> <mailto:nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>>> wrote:
> > >
> > > I know, I thought before this thread was over we would be going back to one piece wings, single aileron and tail servos, and non computerized tx's lol
> > >
> > > Sent from my T-Mobile 4G LTE Device
> > >
> > >
> > > -------- Original message --------
> > > From: Ed Alt via NSRCA-discussion < nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org> <mailto:nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>> >
> > > Date: 02/24/2015 4:10 PM (GMT-05:00)
> > > To: jpavlick at idseng.com <mailto:jpavlick at idseng.com> <mailto:jpavlick at idseng.com <mailto:jpavlick at idseng.com>> , John Pavlick < jpavlick26 at att.net <mailto:jpavlick26 at att.net> <mailto:jpavlick26 at att.net <mailto:jpavlick26 at att.net>> >, General pattern discussion < nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org><mailto:nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>> >
> > > Subject: Re: [NSRCA-discussion] Matt Finley ( Arming Plug )
> > >
> > > I know. This effectively kills the idea for an automatic, electronic rag thrower.
> > >
> > >
> > >
> > > On Feb 24, 2015, at 4:09 PM, John Pavlick via NSRCA-discussion < nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org> <mailto:nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>>> wrote:
> > >
> > > Be careful, you just made WAY too much sense! LOL
> > >
> > > John Pavlick
> > > Cell: 203-417-4971
> > >
> > > <image001.png>
> > > Integrated Development Services
> > >
> > > From: NSRCA-discussion [mailto:nsrca-discussion-bounces at lists.nsrca.org <mailto:nsrca-discussion-bounces at lists.nsrca.org> <mailto:nsrca-discussion-bounces at lists.nsrca.org <mailto:nsrca-discussion-bounces at lists.nsrca.org>>] On Behalf Of John Gayer via NSRCA-discussion
> > > Sent: Tuesday, February 24, 2015 3:53 PM
> > > To: General pattern discussion
> > > Subject: Re: [NSRCA-discussion] Matt Finley ( Arming Plug )
> > >
> > > An arming plug was never intended to be the cure-all for all electric safety issues. I consider it a baseline that is easy to comply with. All the anecdotal evidence in the world that each responder to this list is safe does not help establish a minimum set of standards. Each one of you has a good process that works for you. Each one of those processes could be easily amended to incorporate an arming plug if it doesn't already.
> > > It isn't those with a good process that are the safety problem. It's the neophyte that hears the experienced pilot expound on why he is safe without an arming plug because he does everything else right. The beginner doesn't hear or doesn't understand all the issues with setting up failsafe, throttle cut, arming conditions, thumb on throttle stick that are part of that process of achieving safe operations in the pits and on the runway whether you have an arming plug or not.
> > > I have seen models without arming plugs, without external receiver switches and canopies that require two hands to remove. Last time I checked failsafe operation at a contest, full throttle kill was running about 50%. Most of the remaining were simply going to hold which doesn't help at all if you already have a problem. Eventually a setup like that will cause a disaster.
> > > An arming plug is a small thing to add. It can be done lightly, cheaply and reliably. It provides a visual indication to all that the motor/ESC is unpowered. It is not dependent on any other function in the model to operate.
> > > John
> > >
> > > On 2/23/2015 10:49 PM, Steve Hannah via NSRCA-discussion wrote:
> > > I agree 100% with Jerry.
> > >
> > > The multiple throttle kill approach is the best. I have seen the same things as Jerry. The best safety approach is always a multi-pronged solution.
> > >
> > > I use a slider to drop the throttle below arming level and a switch to nullify the throttle stick. Then, for added security I always hold the stick down with my thumb as my caller/helper retrieves the plane. They usually don't turn off the receiver so I assume my plane is live until I prove otherwise and shut it down.
> > >
> > > An external plug is one way, but I fail to see how it provides any more safety than my method. Switching it off from my transmitter and disabling the throttle stick are very secure means and I know the ESC has been shut down. I don't rely on a person to pull a plug.
> > >
> > > Along with that, proving you have a failsafe is a reasonable request and shouldn't be an issue for anyone.
> > >
> > >
> > >
> > > On Feb 23, 2015, at 08:50, Budd Engineering via NSRCA-discussion <nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org> <mailto:nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>>> wrote:
> > >
> > > At nearly every contest I've attended since I started flying electric in pattern (the 2004 Nats in Masters) I've seen at least one occurrence where someone retrieved a plane without removing an arming plug first. Usually the pilot reminds the person to do it while they're carrying the plane back or as they're setting it down somewhere. It happens with my planes too and I make sure they switch the receiver off and then I remove my canopy and disconnect the battery directly. But before they even get that far I've taken the other steps to make sure there's virtually no chance the motor is going to run.
> > >
> > > My point is this. A layered approach is the only way I've found to effectively mitigate this particular risk to the levels of safety that you claim. Relying on someone to remove an arming plug is not a complete panacea and may lend a false sense of security that the motor system has been de-energized, when in fact it may not have been. There's many ways to manage the risk to the desired level, the use of an arming plug is one, and may not necessarily be the best.
> > >
> > > Jerry
> > >
> > > Sent from my iPhone
> > >
> > > On Feb 23, 2015, at 5:29 AM, Matthew Finley via NSRCA-discussion <nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org> <mailto:nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>>> wrote:
> > >
> > > I use the Ultra Deans stlye Arming Plug from F3A Unlimited, and It works very well. I would gather it provides you with a 99 % dagree of confidence that your caller , plane carrier , yourself, or anyone else will not be harmed. Yes... I do agree that there is a miniscuel chance that a pilot / caller could forget to unplug the safety, however I feel most pilots that have been doing it a while is like tying your shoes, or etc.... On all of my electrics except for indoor ships, I have some sort of disconnect. I for one would like to see it an inforced rule at all sanctioned meets not just pattern meets, that any plane over a certain size or weight must have one in order to fly. Just my three pennies
> > >
> > >
> > > Matthew E. Finley
> > > QCI - Technology Assistant
> > > 614-557-3846 Mobile
> > > mfinley at quadcityinnovations.com <mailto:mfinley at quadcityinnovations.com> <mailto:mfinley at quadcityinnovations.com <mailto:mfinley at quadcityinnovations.com>>
> > >
> > >
> > > _______________________________________________
> > > NSRCA-discussion mailing list
> > > NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org> <mailto:NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>>
> > > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion> <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>>
> > > _______________________________________________
> > > NSRCA-discussion mailing list
> > > NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org> <mailto:NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>>
> > > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion> <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>>
> > >
> > >
> > >
> > > _______________________________________________
> > > NSRCA-discussion mailing list
> > > NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org> <mailto:NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>>
> > > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion> <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>>
> > >
> > > _______________________________________________
> > > NSRCA-discussion mailing list
> > > NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org> <mailto:NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>>
> > > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion> <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>><Mail Attachment.txt> _______________________________________________
> > > NSRCA-discussion mailing list
> > > NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org> <mailto:NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>>
> > > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion> <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>>
> > > _______________________________________________ NSRCA-discussion mailing list NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org> <mailto:NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion> <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>>_______________________________________________
> > > NSRCA-discussion mailing list
> > > NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>
> > > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>
> >
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20150224/fdd471bd/attachment.html <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20150224/fdd471bd/attachment.html>>
> >
> > ------------------------------
> >
> > Message: 10
> > Date: Wed, 25 Feb 2015 20:48:16 +0000
> > From: "Atwood, Mark" <atwoodm at paragon-inc.com <mailto:atwoodm at paragon-inc.com>>
> > To: NSRCA General <nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>>
> > Subject: [NSRCA-discussion] DA150 in the Raffle
> > Message-ID: <CBB6C2D4-1FCA-4A1D-ACC5-0EBFE4690517 at paragon-inc.com <mailto:CBB6C2D4-1FCA-4A1D-ACC5-0EBFE4690517 at paragon-inc.com>>
> > Content-Type: text/plain; charset="windows-1252"
> >
> > Yet another great raffle prize for the F3A team fund raiser. Desert Aircraft has sent us a DA-150L engine for the raffle. Now we?re giving away something to power those nice big birds that JTec has donated!
> >
> > Let?s see some ticket sales! www.teamUSAF3A.com <http://www.teamusaf3a.com/><http://www.teamUSAF3A.com <http://www.teamusaf3a.com/>>
> >
> >
> > Mark Atwood
> > Paragon Consulting, Inc. | President
> > 5900 Landerbrook Drive Suite 205, Cleveland Ohio, 44124
> > Direct: 440.229.2502 | Fax: 440.684.3102
> > www.paragon-inc.com <http://www.paragon-inc.com/><http://www.paragon-inc.com/ <http://www.paragon-inc.com/>>
> >
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20150225/3c5fa013/attachment-0001.html <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20150225/3c5fa013/attachment-0001.html>>
> >
> > ------------------------------
> >
> > Subject: Digest Footer
> >
> > _______________________________________________
> > NSRCA-discussion mailing list
> > NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>
> > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>
> >
> > ------------------------------
> >
> > End of NSRCA-discussion Digest, Vol 111, Issue 15
> > *************************************************
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20150225/bb95d77a/attachment.html>
More information about the NSRCA-discussion
mailing list