[NSRCA-discussion] YS 140 Sport stuck exhaust header

[David Harmon]

Don’t forget to loosen the small Phillips head screw….then try the punch/hammer.

 

David Harmon

Sperry, OK

 

From: NSRCA-discussion [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Duane Beck via NSRCA-discussion
Sent: Saturday, August 1, 2015 3:08 PM
To: nsrca-discussion at lists.nsrca.org
Subject: Re: [NSRCA-discussion] YS 140 Sport stuck exhaust header

 

Here's a photo of the header, showing the mangled fastener.

https://goo.gl/photos/K1VHJ5n5h16aMGHM9

 

Duane

 

  _____  

From: "Verne Koester" <verne at mi.rr.com <mailto:verne at mi.rr.com> >
To: "Duane Beck" <duane.e.beck at comcast.net <mailto:duane.e.beck at comcast.net> >, "General pattern discussion" <nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org> >
Sent: Saturday, August 1, 2015 2:46:41 PM
Subject: Re: [NSRCA-discussion] YS 140 Sport stuck exhaust header

 

Couple of possible options. If the socket is metric, try forcing on the closest larger us size. You might also be able to cut a slot in it with a cutoff wheel and use a large screwdriver to get it out. A photo for all to see might help with ideas. 

Verne

 

Sent from my iPhone


On Aug 1, 2015, at 2:37 PM, Duane Beck via NSRCA-discussion <nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org> > wrote:

 

I have a YS FZ140 (Sport) that has an exhaust header attached with what appears to be a 10mm socket cap screw, or similarly broached fastener.  The socket has been damaged a bit by previous installation and removal, to the point where I can't get an allen wrench to hold tightly.  When I try to turn it, the wrench slips.  Any suggestions for how to remove the header?

 

Duane

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20150801/3a064655/attachment.html>