[NSRCA-discussion] Wiring up adapters for a Cellpro 10XP

[Verne Koester]

Tim, you are correct. It is the same for 5s packs, different for less than 5s. I made and use the same pigtails you are describing. 

Verne Koester

Sent from my iPhone

> On Jul 4, 2014, at 12:06 PM, "Pascoe, Tim \[Burlington\] via NSRCA-discussion" <nsrca-discussion at lists.nsrca.org> wrote:
> 
> I’m just looking for some clarification here. I want to do away with the bulky balance boards for my 10XP, and have purchased pigtails for plugging into the charger from FMA. I also have male JST-XH plugs for the other end, for balancing/charging my 5S packs (6 pin). As far as I can tell from the CellPro manual, in this particular instance the JST-PA and JST-XH wiring pin to pin are exactly the same. While the charger firmware allows for ‘native’ JST-XH wiring, this would only be required for less than 5S.
>  
> Yes? No? Am I missing something?
>  
> http://revolectrix.com/support_docs/item_1375.pdf for the wiring diagram (pages 28-30).
>  
> Anyone else done this to streamline their field charging rig?
>  
> Tim Pascoe
>  
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20140704/61592ce6/attachment.html>