[NSRCA-discussion] test1

[Dave Lockhart]

Attached PDF for how to setup fixed endpoints, originally written by Steve
Rogers (Castle Creations) and posted in RCG.  Do take the prop off first
just in case you make a mistake.

I'm guessing you have ESC set for fixed endpoints, and travel volume at 100%
high and 100% low.  You probably need to be closer to 75% high and 75%
low....whatever puts the stick outputs at 1.2ms low and 1.8ms high, which is
what Castle recognizes as low and high in fixed endpoint mode.

Regards,

Dave Lockhart
Team Castle Creations

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of
wayg2013 at gmail.com
Sent: Monday, January 27, 2014 9:04 PM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] test1

OK... let me wake you guys up.....

Have a NEU setup with a Castle Pheonix Ice2 HV80 series controller. Down
loaded current software.
I'm only getting throttle from 1/4 to 3/4 and it is full range in this area
as far as the power is concerned.
How do I get the controller to recognize the sticks at the full limits?
I stick calibrate on initial startup but still does no good.  Did I miss
something in the computer programing?
I used the manual calibrate setting and 30% brake.
Using a Futaba 12Z (please no anti Futaba rebuttal, heh heh)

Thanks
Wayne(is back)

-----Original Message-----
From: Charlie Rock
Sent: Monday, January 27, 2014 1:21 PM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] test1

Just been a really quiet winter Bob!!:))

Patriotism is supporting your country all the time, and your government when
it deserves it!!!
Mark Twain


> On Jan 27, 2014, at 12:46 PM, rcairbob1 at comcast.net wrote:
>
> test1
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion 

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Setup%20Fixed%20Endpoints[1].pdf
Type: application/pdf
Size: 52182 bytes
Desc: not available
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20140128/a86bee35/attachment.pdf>