[NSRCA-discussion] Osiris 47 inch wings needed

Tue Feb 4 15:47:36 AKST 2014

I have a 62” Osiris Blue with an OS50 motor(looks just like a Hacker, ‘cept its blue)and 170HV-OS speed control, 16x10 APC and digital JR servos. 
450mil LiPo flight pack...ready to fly.
I have flown it with 5s 4000mil and 5s-5000 both equally well.
Actually like the lighter 4000 packs better.
I have fewer then 25 flights on it and flies great as advertised.

HOWEVER... Having two full size pattern planes this airplane has become a hangar queen and needs a new home.
Interested parties contact me off line....
RTF less receiver ...............  $750.00 
North Texas pickup... not sure I wanna ship it.

Wayne

From: kingconsulting 
Sent: Tuesday, February 4, 2014 4:31 PM
To: General pattern discussion 
Subject: Re: [NSRCA-discussion] Osiris 47 inch wings needed

I have the same model but no extra wings sorry. They are not carrying the 47" anymore. I also heard no more 62" version either. I bought some extra wheel pants for the 47 and glad I did. 

I know Andrew Jesky is starting his own plane company not sure if that has something to do with it. I hope he comes out with a pattern plane of his own.

Robert King

On Feb 4, 2014, at 2:17 PM, Bill Harden <flyinbill1 at bellsouth.net> wrote:

  For the record, I didn’t complain to 3D Hobby Store about the warped wing, I simply asked if there were any replacement wings available; that was back in Nov of 2012; a very long time ago.    You can read the e-mail that I copied below for yourself.  At any rate, 3D HobbyShop didn’t get back with me and there was never a replacement wing in stock from Nov 2012  to now.  So at this moment I have to deal with the plane as is.  Hopefully , someone out there in pattern land will have a wing they would be willing to let go.

  Thanks,

  Bill Harden

  -------------------------------------------

  William,

  We will check to see if there are any available on Monday and respond.

  Happy Thanksgiving,

  3DHS
  On Wed, Nov 21, 2012 at 11:18 AM, William C. Harden <flyinbill1 at bellsouth.net> wrote:
  3DHobbyShop,

  I am in need of a right wing for the blue 47 inch Osiris plane.  I have
  noticed that the blue right wing hasn't been in stock for a very long time.
  When does 3DHobbyShop expect to have the wing in stock?

  Thanks,

  Bill Harden

  From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Peter Vogel
  Sent: Tuesday, February 04, 2014 4:01 PM
  To: General pattern discussion
  Subject: Re: [NSRCA-discussion] Osiris 47 inch wings needed

  3DHS has really gone down hill since Noll took over for Ben.

  Peter+

  On Tue, Feb 4, 2014 at 1:56 PM, Jay Marshall <lightfoot at sc.rr.com> wrote:
  Nice warranty and support. Guess I’ll now have to reconsider…..

  Jay Marshall

  From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Bill Harden
  Sent: Tuesday, February 04, 2014 4:37 PM
  To: NSRCA Discussion List
  Subject: [NSRCA-discussion] Osiris 47 inch wings needed

  If anyone has a straight right wing panel or both wing panels that they wouldn’t mind selling then please contact me off-list.  I have a blue plane, but I’ll take either blue or red wings. 

  The Osiris kit that I purchased from 3D Hobby Store had a warped right wing panel and there aren’t any spare wings in stock for purchase.

  Thanks,

  Bill Harden

  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

  --
  Director, Fixed Wing Flight Training
  Santa Clara County Model Aircraft Skypark

  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

--------------------------------------------------------------------------------
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20140205/3ef0045c/attachment.html>