[NSRCA-discussion] Castle Edge 80HV Lite: suitable for F3a?

[Daniel Underkofler]

Thanks guys!  I've got a pretty good airflow situation, so I'll give the
Lite a try.



On Sat, Apr 12, 2014 at 9:42 AM, Dave Lockhart <DaveL322 at comcast.net> wrote:

> Dan,
>
>
>
> The more adventurous among us have been running very light versions of the
> Castle ESCs for quite some time now.  I ran the original Phoenix 85 and
> Phoenix ICE with no heat sinks.  The Phoenix Edge light actually has a heat
> sink, it is just much smaller than the regular version.  They will run a
> little bit warmer, so it is important to make sure you have good airflow to
> keep them cool.
>
>
>
> Regards,
>
>
>
> Dave Lockhart
>
> Team Castle Creations
>
>
>
>
>
> *From:* nsrca-discussion-bounces at lists.nsrca.org [mailto:
> nsrca-discussion-bounces at lists.nsrca.org] *On Behalf Of *Mike Mueller
> *Sent:* Saturday, April 12, 2014 11:16 AM
> *To:* General pattern discussion
> *Subject:* Re: [NSRCA-discussion] Castle Edge 80HV Lite: suitable for F3a?
>
>
>
> Hey Dan yes is the simple answer. It's running neck and neck in popularity
> with the regular Edge HV 80 for F3A 10S use.
>
>  Mike Mueller
>
>
>
> On Sat, Apr 12, 2014 at 8:58 AM, Daniel Underkofler <underdw at gmail.com>
> wrote:
>
> Guys,
>
> Have folks been getting away with using the Lite version of the Castle
> Edge 80HV?
>
>
>
> Thanks, Dan
>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20140413/f128dcf8/attachment.html>