[NSRCA-discussion] Castle Edge 80HV Lite: suitable for F3a?

[Dave Lockhart]

Dan,

 

The more adventurous among us have been running very light versions of the
Castle ESCs for quite some time now.  I ran the original Phoenix 85 and
Phoenix ICE with no heat sinks.  The Phoenix Edge light actually has a heat
sink, it is just much smaller than the regular version.  They will run a
little bit warmer, so it is important to make sure you have good airflow to
keep them cool.  

 

Regards,

 

Dave Lockhart

Team Castle Creations

 

 

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Mike Mueller
Sent: Saturday, April 12, 2014 11:16 AM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] Castle Edge 80HV Lite: suitable for F3a?

 

Hey Dan yes is the simple answer. It's running neck and neck in popularity
with the regular Edge HV 80 for F3A 10S use.

 Mike Mueller

 

On Sat, Apr 12, 2014 at 8:58 AM, Daniel Underkofler <underdw at gmail.com>
wrote:

Guys,

Have folks been getting away with using the Lite version of the Castle Edge
80HV?

 

Thanks, Dan


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20140412/270cdba5/attachment.html>