[NSRCA-discussion] Hobby King Arcus F3A Biplane

[Robert L. Beaubien]

Jon,

Just got mine in.  I agree with you on the servos.  What Solar servo did you use?  D653?

Thanx,

-           Robert Beaubien
-           Sr. Software Architect
-           Kool Software LLC

"No trees were harmed in the sending of this message, however a large number of electrons were terribly inconvenienced."

From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Jon Lowe
Sent: Tuesday, March 18, 2014 6:09 AM
To: nsrca-discussion at lists.nsrca.org
Subject: Re: [NSRCA-discussion] Hobby King Arcus F3A Biplane

I got one this past week.  Yeah shipping was ridiculous.  But the plane is very nice.  Well packed and protected.  Easy to put together, took about 45 minutes.  Even comes with an exact Chinese copy of an APC prop.  Only way to tell it's fake is it has a China hobby name on the hub instead of APC.

The think I like about this is that the control surfaces are pattern sized, not 3D sized.  I haven't hooked up a receiver yet, so don't know how good the servos are.  But Solar digitals in this size are about $7 apiece, and they have very good resolution.

I have a couple of 2200 3s packs I will try, and I ordered a couple of 4s packs.  The manual says 3s, but the HK page says 3s or 4s.  Battery compartment seems adequate for light 4s packs.

No instructions for the ESC.  They do tell you how to turn off the brake should you turn it on, but nothing about setting end points, etc.  It isn't labeled with a HK sticker, so I don't know what it is.  Guess I'll do some online searching.

Looking forward to flying it,  but weather and the F3P Team Trial this weekend are conspiring against me.
Jon
-----Original Message-----
From: Robert L. Beaubien <rob at koolsoft.com<mailto:rob at koolsoft.com>>
To: General pattern discussion <nsrca-discussion at lists.nsrca.org<mailto:nsrca-discussion at lists.nsrca.org>>
Sent: Thu, Mar 13, 2014 1:49 am
Subject: Re: [NSRCA-discussion] Hobby King Arcus F3A Biplane
I just went to order one.  Did you actually pay the $76+ shipping on the plane out of China, or did you get it from a different warehouse?  I think I’ll wait for it to be available in a US warehouse.

-           Robert Beaubien
-           Sr. Software Architect
-           Kool Software LLC

"No trees were harmed in the sending of this message, however a large number of electrons were terribly inconvenienced."

From: nsrca-discussion-bounces at lists.nsrca.org<mailto:nsrca-discussion-bounces at lists.nsrca.org> [mailto:nsrca-discussion-bounces at lists.nsrca.org<mailto:nsrca-discussion-bounces at lists.nsrca.org?>] On Behalf Of Matthew Finley
Sent: Wednesday, March 12, 2014 9:58 AM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] Hobby King Arcus F3A Biplane

I ordered one to play with yesterday. My guess is the servos may need replaced due to poor centering, but it's a pretty cool plane to mess around with after a pattern meet in the evenings.


Matthew E. Finley

Key-Note Piano Tuning and Service
(614)272-2604 Business
(614)557-3846 Cell
Key_note_piano at yahoo.com<mailto:Key_note_piano at yahoo.com>

________________________________
From: rob at koolsoft.com<mailto:rob at koolsoft.com>
To: nsrca-discussion at lists.nsrca.org<mailto:nsrca-discussion at lists.nsrca.org>
Date: Wed, 12 Mar 2014 16:42:44 +0000
Subject: [NSRCA-discussion] Hobby King Arcus F3A Biplane
Does anyone have any experience with one of these?  Thinking of adding it to my collection.

http://www.hobbyking.com/hobbyking/store/__51280__Arcus_F3A_Aerobatic_Biplane_EPO_1000mm_PNF_.html



-           Robert Beaubien
-           Sr. Software Architect
-           Kool Software LLC

"No trees were harmed in the sending of this message, however a large number of electrons were terribly inconvenienced."


_______________________________________________ NSRCA-discussion mailing list NSRCA-discussion at lists.nsrca.org<mailto:NSRCA-discussion at lists.nsrca.org> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_______________________________________________

NSRCA-discussion mailing list

NSRCA-discussion at lists.nsrca.org<mailto:NSRCA-discussion at lists.nsrca.org>

http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20140412/267846a8/attachment.html>