[NSRCA-discussion] What is the difference between JST-XH/GP/PQ balance plugs

[Robert L. Beaubien]

You have to use balance boards with CellPro 10s.   It has 2 custom connectors that you plug in whatever balance boards you purchase for it.  I have 2 of each type for mine.

-           Robert Beaubien
-           Sr. Software Architect
-           Kool Software LLC

"No trees were harmed in the sending of this message, however a large number of electrons were terribly inconvenienced."

From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of John Gayer
Sent: Thursday, April 10, 2014 12:41 PM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] What is the difference between JST-XH/GP/PQ balance plugs

Mike,
What are the connectors on the Cellpro 10 itself. I prefer to make extensions for the 5S JST-XH rather than fight with the balance boards all the time. I seem to have lost that information.
Thanks,
John
On 4/10/2014 12:02 PM, Mike Mueller wrote:
Scott your right Power Unlimited Lipos by F3aUnlimited were mostly PQ. Since I took over I've made a decision to switch our newest packs over to JST/XH. It's the most popular since Hobby King uses this plug. Why fight it.
 I think it's like Beta versus VHS in the end even Sony started making VHS and Beta was no more.
 The balance boards on cellpro chargers are GP/KO (Works with Hobby King JST/XH) and TP/PQ. Works with polyquest and thunder power. We sell a lot of simple adaptors that allow you to use different balancers.
 Thanks, Mike


On Thu, Apr 10, 2014 at 12:49 PM, Michael Ramsey <milehipilot at gmail.com<mailto:milehipilot at gmail.com>> wrote:
I've used this source successfully to understand the differences:
http://www.hansenhobbies.com/products/connectors/
They are a resource that seems to cover all balance tap types accept those used by Thunder Power and Flight Power.

On Thu, Apr 10, 2014 at 11:59 AM, Anthony Romano <anthonyr105 at hotmail.com<mailto:anthonyr105 at hotmail.com>> wrote:

IIRC the JST-xh and the PQ are the same spacing and wiring order but the PQ has a locking tab. A JST is the little red one on small foamy packs. TP is much smaller.

Anthony
________________________________
From: precisionaero at hotmail.com<mailto:precisionaero at hotmail.com>
To: nsrca-discussion at lists.nsrca.org<mailto:nsrca-discussion at lists.nsrca.org>
Date: Thu, 10 Apr 2014 09:14:13 -0600
Subject: [NSRCA-discussion] What is the difference between JST-XH/GP/PQ balance plugs
Is there a functional difference between these balance plug types?

Mike Cohen

_______________________________________________ NSRCA-discussion mailing list NSRCA-discussion at lists.nsrca.org<mailto:NSRCA-discussion at lists.nsrca.org> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org<mailto:NSRCA-discussion at lists.nsrca.org>
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org<mailto:NSRCA-discussion at lists.nsrca.org>
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion





_______________________________________________

NSRCA-discussion mailing list

NSRCA-discussion at lists.nsrca.org<mailto:NSRCA-discussion at lists.nsrca.org>

http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20140410/5c2d989f/attachment.html>