[NSRCA-discussion] DUMB E-Power Question

[Earl Haury]

And the best way to obtain the thin leather is to sand down a leather belt 
on a belt sander!

Earl

-----Original Message----- 
From: Atwood, Mark
Sent: Sunday, September 08, 2013 10:13 AM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] DUMB E-Power Question

I've found the a small thin piece of leather works the best. Provides 
tremendous grip and doesn't scrape or chew into anything.

Sent from my average intelligence  phone


On Sep 8, 2013, at 10:52 AM, "Ronald Van Putte" 
<vanputter at gmail.com<mailto:vanputter at gmail.com>> wrote:

I like to use two pieces of coarse emory cloth glued back-to-back for 
situations like this.  It's more sturdy than sandpaper.

Ron

On Sep 8, 2013, at 9:36 AM, Jon Lowe wrote:

Saw this last weekend with a friends airplane.  Turned out that the motor 
shaft size adapter in the backplate wasn't flush with the rest of the 
backplate, so instead of the whole backplate contacting the front of the 
motor, only the size adapter was contacting the front of the motor.  Filed 
the adapter down to be flush with the spinner backplate, and the problem was 
solved.

The sticky backed sandpaper trick works also if the above isn't the cause. 
Make it as big in diameter as the contact area between the front of the 
motor and the backplate.
Jon
-----Original Message-----
From: Bob Pastorello <rpasto513 at gmail.com<mailto:rpasto513 at gmail.com>>
To: PatternList 
<nsrca-discussion at lists.nsrca.org<mailto:nsrca-discussion at lists.nsrca.org>>
Sent: Sat, Sep 7, 2013 7:22 pm
Subject: [NSRCA-discussion] DUMB E-Power Question

Okay - Saturday night laughs - have new OS 375Kv for Monolog 70.  Nice, 
powerful, 1400W setup on 6S.

Now how the $%(* do I hold the hub whilst attempting to tighten spinner 
backplate and prop...this is driving me nuts, and NO, I will *NOT* grab vise 
grips or channellocks.
This is a serious question, though - I have tried everything I 
remember....please...somebody help???

--
Bob Pastorello
rpasto513 at gmail.com<mailto:rpasto513 at gmail.com>

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org<mailto:NSRCA-discussion at lists.nsrca.org>
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org<mailto:NSRCA-discussion at lists.nsrca.org>
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org<mailto:NSRCA-discussion at lists.nsrca.org>
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion