[NSRCA-discussion] Re Chrysler T&C 3rd row seat Removed

[Jay S. Gerber]

Ron, is this a replacement for the van that you and Dave have been driving …..:>)  Jay

 

From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of ronlock at comcast.net
Sent: Sunday, September 01, 2013 10:42 AM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] Re Chrysler T&C 3rd row seat Removed

 

It's done.  Not a bad job for the 2013 T&C non-power 3rd row 60/40 folding seats.

 

For those wanting details -

With seats stowed, lift both flaps that cover hinge joint area.

Remove two small-ish Philips head screws that help hold plastic decorative molding.

At front side of molding, find barely enough room to see into crevice for four about one

inch round black plastic barrel shapes that are part of a clip assembly. (3 are easy to see)

Chrysler says use "trim stick C-4744" to disengage the 4 clips.  I used a large flat blade

screwdriver.  Clips that pop off are a black plastic nut that well fall into the well.

See four 15mm socket head gray bolts, oriented straight down.  Remove them.

Raise seats to upright position, but do not unfold seats.   

See four 15mm socket head black bolts,oriented to front of vehicle.  Remove bolts. 

Each seat will now lift out individually.  

As you lift seats, front legs of the seat will pop out, and make process awkward.

 

Off to make a plywood well cover.  Ron Lockhart

 



 

  _____  

From: ronlock at comcast.net
To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
Sent: Thursday, August 29, 2013 10:54:30 AM
Subject: Re: [NSRCA-discussion] Re Chrysler T&C 3rd row seat removal?

Yes- idea is total removal, and use resulting space for storage.

Ive seen that done in a Sienna and an Odyssey - but not a T&C or Caravan yet.

Looking for thoughts such as Earl's to ease the process - or scare me into

having a professional do it.  <G>

Ron Lockhart

  _____  

From: "Earl Haury" <ejhaury at comcast.net>
To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
Sent: Thursday, August 29, 2013 10:36:33 AM
Subject: Re: [NSRCA-discussion] Re Chrysler T&C 3rd row seat removal?

Ron

 

I’ve done this on other vehicles. Typically the hinge bolts are under the carpet or upholstery . Be aware that at least one hinge will be equipped with a fairly strong spring to offset the seat weight when stowing. Be sure to control it during bolt removal so as not to get smacked by something.

 

Earl

 

 

From: ronlock at comcast.net 

Sent: Thursday, August 29, 2013 9:03 AM

To: General pattern discussion <mailto:nsrca-discussion at lists.nsrca.org>  

Subject: [NSRCA-discussion] Re Chrysler T&C 3rd row seat removal?

 

Hi All,

I want to remove the non-power 3rd row folding rear seats from a 2013 T&C.

I think T&C or Caravan models 2008 and later would be same/similar.

Anyone have any experience doing that?

Any comments on getting them out appreciated.

 

Thanks,  Ron Lockhart

  _____  

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20130901/60ecebcc/attachment.html>