[NSRCA-discussion] Eflite 160 dimensions

[Toby Silhavy]

Thanks that's is very helpful!  I'll download it into turbocad when I get off work!  Thanks again. Toby 

Sent from my iPhone

> On Oct 19, 2013, at 6:12 AM, "J N Hiller" <jnhiller at earthlink.net> wrote:
> 
> It just occurred to me that you may be able to use a DXF file of the Eflite-160, attached. My CAD system (ME-10) converts to DXF but I have no way of checking it.
> Jim
>  
> -----Original Message-----
> From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Toby Silhavy
> Sent: Friday, October 18, 2013 9:28 PM
> To: General pattern discussion
> Subject: [NSRCA-discussion] Eflite 160 dimensions
>  
> Guys I'm designing plane around eflite 160. Can someone give me dimensions from back of mount to front prop backplate. Also need to know dimension of rear mount. Thanks, Toby 
> 
> Sent from my iPhone
> 
> On Oct 18, 2013, at 10:24 PM, Dansy44 <dansy44 at gmail.com> wrote:
> 
> With A50-16S that I have in my Sebart Miss Winds I run 6s with a 17x10 with 70'ish Amps.....never did check the RPM I just when with the speed/presentation I wanted.....I did find the model too fast for me with a 16x12 and lacking in the vertical.
> 
> Sent from Daniel iPad 2
> 
> On Oct 18, 2013, at 21:06, Ihncheol <pnahobbies at sbcglobal.net> wrote:
> 
> Larry,
> A50-16S is a 6S motor with 365kv.
> Is he really running the motor with 8S ?
> It may spinn too fast even with 15 inch diameter 
> http://www.hacker-motor-shop.com/e-vendo.php?shop=hacker_e&SessionId=&a=article&ProdNr=15726736&t=3&c=6681&p=6681
>  
> Above link to hacker shows 16 & 17 inch props on 6S. Most runs the motor with 17 or 18 inch prop on 6S.
>  
> It will be a rocket to start with. I don't know if our electric props can handle more than 8000rpm.
>  
> Check with APC.  They know the maximum RPM on E Props.
> My suggestion is to go 6S and run 17 or 18 inch props.
>  
> Ihncheol
>  
>  
>  
> Sent from my Samsung Galaxy Note® II
> 
> 
> 
> -------- Original message --------
> From: Larry Diamond <ldiamond at diamondrc.com> 
> Date: 10/18/2013 2:13 PM (GMT-06:00) 
> To: General pattern discussion <nsrca-discussion at lists.nsrca.org> 
> Subject: [NSRCA-discussion] Prop Recommendations??? 
> 
> 
> Trying to help a new friend that flew pattern many moons ago in the Chicago area. He tracked me down at my home field... He is now a young 67 years young... Very humbling and very cool !!!!!!!
>  
> I'm new to electrics and don't want to give bad info...
>  
> What is the recommended prop for this set up:
>  
> Airframe - 3D Hobbies Vyper
> Motor - Hacker 50 16s.
> ESC - CC 100A w/ 20A BEC
> Battery Config - two 4s Lipo in series 5000mAh (29.6V)
>  
> I don't know the "C" ratings of his baterries. I'm trying to find out...
>  
> I know nothing about Hacker motors...
>  
> Larry D.
> NSCRA 3083
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> <E-160.dxf>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20131019/ee5ec7a5/attachment.html>