[NSRCA-discussion] Eflite 160 dimensions

[J N Hiller]

Attached is a drawing I made when designing my E-Option-160. The dimensions should be pretty close.
Jim
 
 
-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Toby Silhavy
Sent: Friday, October 18, 2013 9:28 PM
To: General pattern discussion
Subject: [NSRCA-discussion] Eflite 160 dimensions
 
Guys I'm designing plane around eflite 160. Can someone give me dimensions from back of mount to front prop backplate. Also need to know dimension of rear mount. Thanks, Toby 

Sent from my iPhone

On Oct 18, 2013, at 10:24 PM, Dansy44 < dansy44 at gmail.com <mailto:dansy44 at gmail.com> > wrote:
With A50-16S that I have in my Sebart Miss Winds I run 6s with a 17x10 with 70'ish Amps.....never did check the RPM I just when with the speed/presentation I wanted.....I did find the model too fast for me with a 16x12 and lacking in the vertical.

Sent from Daniel iPad 2

On Oct 18, 2013, at 21:06, Ihncheol < pnahobbies at sbcglobal.net <mailto:pnahobbies at sbcglobal.net> > wrote:
Larry,
A50-16S is a 6S motor with 365kv.
Is he really running the motor with 8S ?
It may spinn too fast even with 15 inch diameter 
http://www.hacker-motor-shop.com/e-vendo.php?shop=hacker_e&SessionId=&a=article&ProdNr=15726736&t=3&c=6681&p=6681 <http://www.hacker-motor-shop.com/e-vendo.php?shop=hacker_e&SessionId=&a=article&ProdNr=15726736&t=3&c=6681&p=6681> 
 
Above link to hacker shows 16 & 17 inch props on 6S. Most runs the motor with 17 or 18 inch prop on 6S.
 
It will be a rocket to start with.  I don't know if our electric props can handle more than 8000rpm.
 
Check with APC.  They know the maximum RPM on E Props.
My suggestion is to go 6S and run 17 or 18 inch props.
 
Ihncheol
 
 
 
Sent from my Samsung Galaxy Note® II



-------- Original message --------
From: Larry Diamond < ldiamond at diamondrc.com <mailto:ldiamond at diamondrc.com> > 
Date: 10/18/2013 2:13 PM (GMT-06:00) 
To: General pattern discussion < nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org> > 
Subject: [NSRCA-discussion] Prop Recommendations??? 


Trying to help a new friend that flew pattern many moons ago in the Chicago area. He tracked me down at my home field... He is now a young 67 years young... Very humbling and very cool !!!!!!!
 
I'm new to electrics and don't want to give bad info...
 
What is the recommended prop for this set up:
 
Airframe - 3D Hobbies Vyper
Motor - Hacker 50 16s.
ESC - CC 100A w/ 20A BEC
Battery Config - two 4s Lipo in series 5000mAh (29.6V)
 
I don't know the "C" ratings of his baterries. I'm trying to find out...
 
I know nothing about Hacker motors...
 
Larry D.
NSCRA 3083
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org> 
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org> 
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20131019/bc68468f/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: E-160.pdf
Type: application/pdf
Size: 17685 bytes
Desc: not available
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20131019/bc68468f/attachment.pdf>