[NSRCA-discussion] Fwd: Transmitter Programming Question

[Ronald Van Putte]

That's two of us.

Thanks to everyone who contributed their solutions.  Every time I try something like this, I am amazed by the technical assistance that's available out there and by the tremendous power our equipment has.

Ron Van Putte

On Nov 8, 2013, at 8:21 PM, Phil S. wrote:

> WHEW!!  Glad "we" got that one figured out... lol
> Phil Spelt, KCRC Emeritus, Past President
> AMA 1294 Scientific Leader Member
> SPA L-18, Board Member
> (865)435-1476v, (865)604-0541c
> 
> On 11/8/2013 5:55 PM, Jas wrote:
>> 
>> Glad it worked Ron. Hope you guys have fun there, wish I could be there. But my Sequel will be there for sale (Victor has it).
>> 
>> iJason
>> www.jasonshangar.weebly.com
>> 
>> On Nov 8, 2013, at 12:35 PM, Ronald Van Putte <vanputter at gmail.com> wrote:
>> 
>>> I did just as Jason said, Pmixing the throttle into Aux6, which I plugged the Dimension Engineering 10 amp Battle Switch into and it took a little tweaking of the "point" curve, but it works fine.  There's some hysteresis in the Dimension Engineering 10 amp Battle Switch, which is the reason tweaking is required.  Thanks Jason.  Now maybe the O.S. .61RF in my Conquest VI will run better in our CPA contest here next weekend.
>>> 
>>> Ron Van Putte
>>> 
>>> 
>>> Begin forwarded message:
>>> 
>>>> From: Ronald Van Putte <vanputter at gmail.com>
>>>> Date: November 7, 2013 9:11:00 PM CST
>>>> To: General pattern discussion <nsrca-discussion at lists.nsrca.org>
>>>> Subject: Re: [NSRCA-discussion] Transmitter Programming Question
>>>> Reply-To: General pattern discussion <nsrca-discussion at lists.nsrca.org>
>>>> 
>>>> OK.  I think I understand.  Pmix the throttle to the channel the receiver controlled switch is plugged into and use the throttle as the Pmix switch.  Yes?
>>>> 
>>>> Ron
>>>> 
>>>> On Nov 7, 2013, at 8:28 PM, Jas wrote:
>>>> 
>>>>> Pmix throttle to glow plug and set the points to turn on where you want
>>>>> 
>>>>> iJason
>>>>> www.jasonshangar.weebly.com
>>>>> 
>>>>> On Nov 7, 2013, at 9:04 PM, Ronald Van Putte <vanputter at gmail.com> wrote:
>>>>> 
>>>>>> I think I'll just ignore that.
>>>>>> 
>>>>>> Ron
>>>>>> 
>>>>>> On Nov 7, 2013, at 8:01 PM, Phil S. wrote:
>>>>>> 
>>>>>>> Yes, Ron, switch to JR and it's easy!!!  lol
>>>>>>> Phil Spelt, KCRC Emeritus, Past President
>>>>>>> AMA 1294 Scientific Leader Member
>>>>>>> SPA L-18, Board Member
>>>>>>> (865)435-1476v, (865)604-0541c
>>>>>>> 
>>>>>>> On 11/7/2013 8:17 PM, Ronald Van Putte wrote:
>>>>>>>> 
>>>>>>>> I am trying to turn on an onboard glow plug battery on an O.S. .61RF using a receiver controlled switch, so that the glow will be on when the throttle stick position is less than 15% or so and off above that.  I am drawing a blank on how to accomplish it.
>>>>>>>> 
>>>>>>>> I've used the throttle stick as a switch before to get dual rate rudder, but this is different.
>>>>>>>> 
>>>>>>>> I have a Futaba 12 FG transmitter and will be using a Futaba R617 receiver.
>>>>>>>> 
>>>>>>>> Are there any useful suggestions out there?
>>>>>>>> 
>>>>>>>> Ron Van Putte
>>>>>>>> 
>>>>>>>> 
>>>>>>>> _______________________________________________
>>>>>>>> NSRCA-discussion mailing list
>>>>>>>> NSRCA-discussion at lists.nsrca.org
>>>>>>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>>>>>>> 
>>>>>>>>   
>>>>>>> _______________________________________________
>>>>>>> NSRCA-discussion mailing list
>>>>>>> NSRCA-discussion at lists.nsrca.org
>>>>>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>>>>> 
>>>>>> _______________________________________________
>>>>>> NSRCA-discussion mailing list
>>>>>> NSRCA-discussion at lists.nsrca.org
>>>>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>>>> _______________________________________________
>>>>> NSRCA-discussion mailing list
>>>>> NSRCA-discussion at lists.nsrca.org
>>>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>>> 
>>>> _______________________________________________
>>>> NSRCA-discussion mailing list
>>>> NSRCA-discussion at lists.nsrca.org
>>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>> 
>>> _______________________________________________
>>> NSRCA-discussion mailing list
>>> NSRCA-discussion at lists.nsrca.org
>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>> 
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20131109/c759193c/attachment.html>