[NSRCA-discussion] Question for Electric Guru's

[Ihncheol]

Robert,
I don't see any specifications 3648 600kv at kmp website.
If the motor has 36mm  diameter & 48mm length and at lrast the length of the motor is close, E-Flite Power 32 may be right choice.  If you want more power, power 46 is not bad, but you will need to change the ESC also.  Stock ESC is on border for the 32.

If you can tell the size of the prop at & motor dimensions, it will be easier to find a substitute. 

Ihncheol


Sent from my Samsung Galaxy Note® II

-------- Original message --------
From: "Robert L. Beaubien" <rob at koolsoft.com> 
Date: 03/08/2013  5:19 PM  (GMT-06:00) 
To: General pattern discussion <nsrca-discussion at lists.nsrca.org> 
Subject: Re: [NSRCA-discussion] Question for Electric Guru's 
 
Sorry,  this one should work.  It’s the MX2.  http://www.kmp.ca/product_info.php?cPath=35&products_id=281
 
-          Robert Beaubien
-          D7 Webmaster
 
"No trees were harmed in the sending of this message, however a large number of electrons were terribly inconvenienced."
 
From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Ihncheol
Sent: Friday, March 8, 2013 4:17 PM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] Question for Electric Guru's
 
Robert,
What is the name  of the plane? 
Your link doesn't get to a correct page.
 
Ihncheol
 
 
Sent from my Samsung Galaxy Note® II



-------- Original message --------
From: "Robert L. Beaubien" <rob at koolsoft.com> 
Date: 03/08/2013 5:13 PM (GMT-06:00) 
To: General pattern discussion <nsrca-discussion at lists.nsrca.org> 
Subject: [NSRCA-discussion] Question for Electric Guru's 


I have a question for you electric masters.  I purchased a new park flyer at the AMA Expo and now that I almost have it together, I am really unhappy with the motor setup.  I’m looking at replacing it with a real motor, but really have no idea how determine the right one.  This is the plane: http://www.kmp.ca/product_info.php?cPath=35&products_id=281&osCsid=4d214aaee43cca1e5e153afdb13c943c with a 3-bladed prop (no clue as to pitch).
Specs:
Wingspan: 55"
Flying Weight: 1.9 kg, 4.2 lbs
Wing Load: 50g/dm2
4pcs 9 gram servos (included)
Brushless Powered: Powerful 3648 outer runner brushless motor KV600 (included)
45A ESC (included)
3 Bladed Scale prop and Spinner (included) 
Battery: 2200Mah, 14.8V.20C (NOT included),
Construction: Super Strong EPO FOAM
 
Motor that came with it is this:  http://rc-castle.com/shop/product_info.php?products_id=1678  Spinner backplate doesn’t fit right and, of course, I have no clue what the prop is to replace it.
FMS 3648 600Kv Outrunner Motor For 1.4M Warbird
 
I have 3 – 2200Mah, 14.8v batteries I’d still like to use with it, but if I have to change, then so be it.
 
The real question I have is what is the right way to pick a motor for a given aircraft?  Any suggestions as to a replacement motor?
 
Any help would be appreciated.
 
Thanx,
 
-          Robert Beaubien
-          D7 Webmaster
 
"No trees were harmed in the sending of this message, however a large number of electrons were terribly inconvenienced."
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20130308/8d807f67/attachment.html>