[NSRCA-discussion] F3P

[DaveL322@comcast.net]

I've not seen all the HK stuff...but what I have seen is on the heavy side, and you will be quite challenged to fly F3P in all but the largest gyms.  Ceiling height is the big factor.  Large F3P foamies like the deluxe, symmetric, spies (I import these).....they will fly well up to 5 oz with 30' ceilings....and of course better at 4 to 4.5 oz.  Anything smaller at that weight will be ballistic in downlines.  Fancy Foam Osiris v2, SB Models Excel v2 are moderate sized and ok at 4.5 oz.....but again lighter is better....3.5 to 4 oz.  Getting to 3.5 oz becomes a real challenge when quality servos, linkages, and structural integrity are maintained.

Regards,

Dave

Sent from my HTC EVO 4G LTE exclusively from Sprint

----- Reply message -----
From: "Scott McHarg" <scmcharg at gmail.com>
To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
Subject: [NSRCA-discussion] F3P
Date: Mon, Feb 4, 2013 09:28
Good morning all,     The Board of Directors has been talking a lot about F3P lately.  Down in Texas, we don't have a lot of indoor events but I am interested.  The conversation came up about the newest airplanes and what everyone was trying to pick up.  It was suggested that HobbyKing has quite a few models with one in particular being "the one to get".  Is this the F3P Matrix or the MXS or neither?  What is the difference between a "kit" and one that is not labeled as such?  Is the kit truly stick-built and covered?  Any good tips would be appreciated.  We have a nice gym that I have access to and I'd like to give it a try.

Thanks,
-- 
Scott A. McHarg
Sr. Systems Engineer - Infrastructure
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20130204/8cbc4e17/attachment.html>