[NSRCA-discussion] jr 9303 help needed

[Ken Velez]

If your servos are connected to correct channels, RT aileron to the aileron
port and the LT aileron to the Aux 1, with the Flaperon function ON the trim
should work. Just make sure the flap system on the function menu is turned
to 0 for normal and land or disable the flap system on the Systems menu. if
the trim doesn't work something is wrong with your radio. The trim won't
work with a P-MIX. I'm just not sure if there could be anything ON functions
wise that could prevent the trim from working on the Flaperon function. I
would try a different memory that's not in use, reset the Data, bind it,
select the Flaperon function and INH the Flap system. Hope this helps

 

Ken

 

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of ronclark
tds.net
Sent: Sunday, July 15, 2012 10:06 PM
To: General pattern discussion
Subject: [NSRCA-discussion] jr 9303 help needed

 

 

 

I'm trying to program my aileron servos on two different channels. I've
tried a standard mix, as well as a flaperon mix. The problem is I cannot get
the trim to work on the slave channel. Help..............

Ron

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20120716/ec675f26/attachment.html>