[NSRCA-discussion] Anyone running a Falcon prop on a Hacker Q60?

[trexlesh@msn.com]

The bushings are very thin and soft...after the first install, they crush to fit like the crush sleeve in an auto rearend. It'll fit tight from then on.

Rex

Sent from my Verizon Wireless Phone

----- Reply message -----
From: "J N Hiller" <jnhiller at earthlink.net>
To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
Subject: [NSRCA-discussion] Anyone running a Falcon prop on a Hacker Q60?
Date: Tue, Jan 10, 2012 8:37 am
Peter I
hate to see errors. I don't know where you got 7.66 mm. 

5/16 =
..3125" A good conversion factor is 25.4. 

.3125 x
25.4 = 7.9375.

8 mm /
25.4 = .3149 5/16 is only .0025" over 5/16. Try the bushing Rex mentioned
yesterday. 

Jim



-----Original
Message-----

From:
nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Peter Vogel

Sent: Tuesday, January 10, 2012
7:16 AM

To: General pattern discussion

Cc: General pattern discussion

Subject: Re: [NSRCA-discussion]
Anyone running a Falcon prop on a Hacker Q60?



The prop bore
is currently 5/16" -- 7.66mm 



Sent from my iPhone4S



On Jan 9, 2012, at 8:49 AM, trexlesh at msn.com
<trexlesh at msn.com> wrote:

What do you need for the bushing OD?



Rex



Sent from my Verizon Wireless Phone



----- Reply message -----

From: "Peter Vogel" <vogel.peter at gmail.com>

To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>

Subject: [NSRCA-discussion] Anyone running a Falcon prop on a Hacker Q60?

Date: Sun, Jan 8, 2012 10:43 pm









I've found lots of bushings to adjust an APC prop hub to a smaller shaft, but I
haven't found anything that seems like it would work with the Q60's 5mm bolt
shaft...  looking for ideas...



Thanks,

Peter+



-- 

Director, Fixed Wing Flight Training

Santa Clara County Model Aircraft Skypark



_______________________________________________

NSRCA-discussion mailing list

NSRCA-discussion at lists.nsrca.org

http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20120111/ee1469b4/attachment.html>