[NSRCA-discussion] Anyone running a Falcon prop on a Hacker Q60?

[Bob Kane]

I thought a drill press was a lathe standing on end . . . .

 
Bob Kane
getterflash at yahoo.com


________________________________
 From: "atwooddon at aol.com" <atwooddon at aol.com>
To: nsrca-discussion at lists.nsrca.org 
Sent: Tuesday, January 10, 2012 11:39 AM
Subject: Re: [NSRCA-discussion] Anyone running a Falcon prop on a Hacker Q60?
 

Redneck lathe?  Been there, done that....  
 
Don



-----Original Message-----
From: trexlesh <trexlesh at msn.com>
To: General pattern discussion <nsrca-discussion at lists.nsrca.org>
Sent: Tue, Jan 10, 2012 8:20 am
Subject: Re: [NSRCA-discussion] Anyone running a Falcon prop on a Hacker Q60?


You could use the Tru-Turn bushings.....just put one on a bolt, chuck it in a drill and dress it with a file to size.

Rex

Sent from my Verizon Wireless Phone


----- Reply message -----
From: "Peter Vogel" <vogel.peter at gmail.com>
To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
Cc: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
Subject: [NSRCA-discussion] Anyone running a Falcon prop on a Hacker Q60?
Date: Tue, Jan 10, 2012 7:16 am



The prop bore is currently 5/16" -- 7.66mm 

Sent from my iPhone4S

On Jan 9, 2012, at 8:49 AM, trexlesh at msn.com <trexlesh at msn.com> wrote:


What do you need for the bushing OD?
>
>Rex
>
>Sent from my Verizon Wireless Phone
>
>
>----- Reply message -----
>From: "Peter Vogel" <vogel.peter at gmail.com>
>To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
>Subject: [NSRCA-discussion] Anyone running a Falcon prop on a Hacker Q60?
>Date: Sun, Jan 8, 2012 10:43 pm
>
>
>I've found lots of bushings to adjust an APC prop hub to a smaller shaft, but I haven't found anything that seems like it would work with the Q60's 5mm bolt shaft...  looking for ideas... 
>
>
>Thanks,
>Peter+
>
>
>
-- 
>
>Director, Fixed Wing Flight Training
>Santa Clara County Model Aircraft Skypark
>
>
_______________________________________________
>NSRCA-discussion mailing list
>NSRCA-discussion at lists.nsrca.org
>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
_______________________________________________
NSRCA-discussion mailing list NSRCA-discussion at lists.nsrca.org http://lists.nsrca.org/mailman/listinfo/nsrca-discussion 
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20120110/c9a18efe/attachment.html>