[NSRCA-discussion] Drilling a hole

[rcmaster199 at aol.com]

Scott and Mike,

I need one of these too. Lets get the supersaver deal from Tower and each of us can have his own copy. How 'bout that ??

As far as FAI rules, I won't tell if you don't.....Wait, that's cheating. Forget I said that!

Matt



-----Original Message-----
From: Michael S. Harrison <drmikedds at sbcglobal.net>
To: 'General pattern discussion' <nsrca-discussion at lists.nsrca.org>
Sent: Thu, Jan 5, 2012 8:24 am
Subject: Re: [NSRCA-discussion] Drilling a hole



That is unacceptable, it is entirely too easy and inexpensive, surely there is an FAI rule that doesn’t allow that.
Mike 
 

From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of ehaury
Sent: Wednesday, January 04, 2012 4:30 PM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] Drilling a hole

 

Tower sells a nice metric reamer that's perfect for 8 & 10mm prop holes. Much better than the Fox. http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXEGH6&P=ML

 

(Twist drills aren't really the way to go - drill press or not.) 

 

Earl 


----- Original Message ----- 

From: Scott McHarg 

To: General pattern discussion 

Sent: Wednesday, January 04, 2012 4:23 PM

Subject: Re: [NSRCA-discussion] Drilling a hole

 

Keith,
   Silence....I kill you!

Warm and loving regards,
Scott

PS - So I guess I should have said "Do I start with a drill bit slightly larger than the EXISTING hole...."  Good grief man.  Don't make any grammatical errors around Mr. Hoard.  :)  Thanks guys, I'll start with the reamer and get to 10mm.  I just wasn't sure if the carbon props required a certain delicacy that isn't required when doing APCs.

On Wed, Jan 4, 2012 at 4:08 PM, Keith Hoard <khoard at gmail.com> wrote:
LOL. . . . just messing with ya Scott!!! 



Keith Hoard
Collierville, TN
khoard at gmail.com






On Wed, Jan 4, 2012 at 4:05 PM, Pete Cosky <pcosky at comcast.net> wrote:

My grandfather used to say "I cut it twice and it's still too short"

Sent from my iPad


On Jan 4, 2012, at 4:50 PM, Ronald Van Putte <vanputte at cox.net> wrote:


Yeah, that's probably true..  When I cut a piece of wood off too short, no matter how many more times I cut it, it's still too short. 

 

Ron

 


On Jan 4, 2012, at 3:42 PM, Keith Hoard wrote:

 


I'd recommend starting with a SLIGHTLY SMALLER drill bit and then working your way to larger sizes . . . . 
.
You may find it doesn't work so well trying to drill a smaller hole starting with a larger one . . .
.

But things may work differently in Texas . . .<330.gif> 



Keith Hoard
Collierville, TN
khoard at gmail.com

  Do you start at a size slightly larger than the diameter of the whole and then work my way up to 10mm for the Neu motor?. . .



-- 
Scott A. McHarg


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


 



_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion



_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

 


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion




-- 
Scott A. McHarg

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion 

No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.1901 / Virus Database: 2109/4722 - Release Date: 01/04/12


_______________________________________________
SRCA-discussion mailing list
SRCA-discussion at lists.nsrca.org
ttp://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20120105/cd4c3b4f/attachment.html>