[NSRCA-discussion] Drilling a hole

[Peter Vogel]

Yep.  That's the one I have.

Carbon props seem to dull it a little faster than APCs do, but they are
effective.

Peter+

On Wed, Jan 4, 2012 at 2:29 PM, ehaury <ejhaury at comcast.net> wrote:

> **
> Tower sells a nice metric reamer that's perfect for 8 & 10mm prop holes.
> Much better than the Fox.
> http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXEGH6&P=ML
>
> (Twist drills aren't really the way to go - drill press or not.)
>
> Earl
>
> ----- Original Message -----
> *From:* Scott McHarg <scmcharg at gmail.com>
> *To:* General pattern discussion <nsrca-discussion at lists.nsrca.org>
> *Sent:* Wednesday, January 04, 2012 4:23 PM
> *Subject:* Re: [NSRCA-discussion] Drilling a hole
>
> Keith,
>    Silence....I kill you!
>
> Warm and loving regards,
> Scott
>
> PS - So I guess I should have said "Do I start with a drill bit slightly
> larger than the EXISTING hole...."  Good grief man.  Don't make any
> grammatical errors around Mr. Hoard.  :)  Thanks guys, I'll start with the
> reamer and get to 10mm.  I just wasn't sure if the carbon props required a
> certain delicacy that isn't required when doing APCs.
>
> On Wed, Jan 4, 2012 at 4:08 PM, Keith Hoard <khoard at gmail.com> wrote:
>
>> LOL. . . . just messing with ya Scott!!!
>>
>>
>> Keith Hoard
>> Collierville, TN
>> khoard at gmail.com
>>
>>
>>
>>
>>  On Wed, Jan 4, 2012 at 4:05 PM, Pete Cosky <pcosky at comcast.net> wrote:
>>
>>>  My grandfather used to say "I cut it twice and it's still too short"
>>>
>>> Sent from my iPad
>>>
>>> On Jan 4, 2012, at 4:50 PM, Ronald Van Putte <vanputte at cox.net> wrote:
>>>
>>>  Yeah, that's probably true..  When I cut a piece of wood off too
>>> short, no matter how many more times I cut it, it's still too short.
>>>
>>> Ron
>>>
>>>  On Jan 4, 2012, at 3:42 PM, Keith Hoard wrote:
>>>
>>>  I'd recommend starting with a *SLIGHTLY SMALLER* drill bit and then
>>> working your way to larger sizes . . . .
>>> .
>>> You may find it doesn't work so well trying to drill a smaller hole
>>> starting with a larger one . . .
>>> .
>>> But things may work differently in Texas . . .<330.gif>
>>>
>>>
>>> Keith Hoard
>>> Collierville, TN
>>> khoard at gmail.com
>>>
>>>   Do you start at a size slightly larger than the diameter of the whole
>>> and then work my way up to 10mm for the Neu motor?. . .
>>>
>>>>
>>>> --
>>>> *Scott A. McHarg*
>>>>
>>>>
>>>> _______________________________________________
>>>> NSRCA-discussion mailing list
>>>> NSRCA-discussion at lists.nsrca.org
>>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>>>
>>>
>>> _______________________________________________
>>> NSRCA-discussion mailing list
>>> NSRCA-discussion at lists.nsrca.org
>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>>
>>>
>>>  _______________________________________________
>>> NSRCA-discussion mailing list
>>> NSRCA-discussion at lists.nsrca.org
>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>>
>>>
>>> _______________________________________________
>>> NSRCA-discussion mailing list
>>> NSRCA-discussion at lists.nsrca.org
>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>>
>>
>>
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>
>
>
>
> --
> *Scott A. McHarg*
>
>  ------------------------------
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
> ------------------------------
>
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2012.0.1901 / Virus Database: 2109/4722 - Release Date: 01/04/12
>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>



-- 
Director, Fixed Wing Flight Training
Santa Clara County Model Aircraft Skypark
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20120104/baa18416/attachment.html>