[NSRCA-discussion] Drilling a hole

[Charlie Rock]

Harry Higley I think Vicente... Charlie

Live each day as though it will be your last, because some day you will surely be right.        
Steve Jobs

On Jan 4, 2012, at 3:46 PM, "Vicente \"Vince\" Bortone" <vicenterc at comcast.net> wrote:

> Scott,
> 
> I use the multi-step reamer.  I suggest to do this by hand or install it the reamer in the press and turn it by hand if you want to make sure is square.  I have been doing this by hand with not issues.  I got mine many years ago from Harry ?????.  Forgot how to spell his last name.  I think is hard to find now  
> 
> Vicente "Vince" Bortone
> 
> From: "Keith Hoard" <khoard at gmail.com>
> To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
> Sent: Wednesday, January 4, 2012 3:42:40 PM
> Subject: Re: [NSRCA-discussion] Drilling a hole
> 
> I'd recommend starting with a SLIGHTLY SMALLER drill bit and then working your way to larger sizes . . . . 
> .
> You may find it doesn't work so well trying to drill a smaller hole starting with a larger one . . .
> .
> But things may work differently in Texas . . .<330.gif>
> 
> Keith Hoard
> Collierville, TN
> khoard at gmail.com
> 
>   Do you start at a size slightly larger than the diameter of the whole and then work my way up to 10mm for the Neu motor?. . .
> 
> -- 
> Scott A. McHarg
> 
> 
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> 
> 
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20120104/37d964c3/attachment.html>