[NSRCA-discussion] Drilling a hole

[Vicente "Vince" Bortone]

Scott, 

I use the multi-step reamer. I suggest to do this by hand or install it the reamer in the press and turn it by hand if you want to make sure is square. I have been doing this by hand with not issues. I got mine many years ago from Harry ?????. Forgot how to spell his last name. I think is hard to find now 


Vicente "Vince" Bortone 

----- Original Message -----
From: "Keith Hoard" <khoard at gmail.com> 
To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org> 
Sent: Wednesday, January 4, 2012 3:42:40 PM 
Subject: Re: [NSRCA-discussion] Drilling a hole 

I'd recommend starting with a SLIGHTLY SMALLER drill bit and then working your way to larger sizes . . . . 
. 
You may find it doesn't work so well trying to drill a smaller hole starting with a larger one . . . 
. 
But things may work differently in Texas . . . 

Keith Hoard 
Collierville, TN 
khoard at gmail.com 

Do you start at a size slightly larger than the diameter of the whole and then work my way up to 10mm for the Neu motor?. . . 




-- 
Scott A. McHarg 


_______________________________________________ 
NSRCA-discussion mailing list 
NSRCA-discussion at lists.nsrca.org 
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion 




_______________________________________________ 
NSRCA-discussion mailing list 
NSRCA-discussion at lists.nsrca.org 
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20120104/cbab8020/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 330.gif
Type: image/gif
Size: 96 bytes
Desc: not available
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20120104/cbab8020/attachment.gif>