[NSRCA-discussion] Arming Switch

[Scott McHarg]

Are y'all using the SPS - SafetyPowerSwitch 60V 60/120A or the bigger one?

On Sun, Feb 12, 2012 at 11:29 PM, Bill's Email <wemodels at cox.net> wrote:

> On 2/12/12 7:19 PM, Peter Vogel wrote:
>
>> Some would argue my preferred arming switch (The Emcotec safety power
>> switch seen here: http://www.hkm-models.com/**Emcotec%20Switches.html<http://www.hkm-models.com/Emcotec%20Switches.html>)
>> does the same thing and I should use a more traditional circuit
>> interrupting jumper ala the options Keith listed and I sent out a similar
>> list a little before that but it would take the simultaneous failure of
>> multiple independent components for that to happen.
>>
>
>
> FWIW as another voice in the wind, I too use the Emcotec magnetic switch.
> Works great, plug the packs in and everything is safe until you pull the
> plug. I also use their magnetic radio switch for the RX packs. Nice
> regulated unit (also available unregulated). Rock sold devices that are
> well built and worth every penny.
>
> I look at these things from this perspective. Can anyone name on bad thing
> that can happen using an arming switch/device?
>
> Now how many bad things can you name if not using one?
>
>
>
> ______________________________**_________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.**org <NSRCA-discussion at lists.nsrca.org>
> http://lists.nsrca.org/**mailman/listinfo/nsrca-**discussion<http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>
>



-- 
*Scott A. McHarg*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20120213/bbe26e74/attachment.html>