[NSRCA-discussion] Arming Switch

[J N Hiller]

Look at page 14 of the Feb Model Aviation.
Jim

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Ronald Van
Putte
Sent: Sunday, February 12, 2012 11:37 AM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] Arming Switch

You can mount a female Deans connector in a piece of thin plywood, use Pacer
Pro Zap to glue the Deans connector to the plywood and, after cutting an
appropriate hole in the side of the fuselage, glue the assembly inside the
fuselage.  Use a male Deans connector with the leads soldered together as an
arming plug.

Or you can buy a SharpRC SafeArm (
http://www.sharprc.com/catalog/index.php?cPath=43)

Being cheap, I do the former.

Ron Van Putte

On Feb 12, 2012, at 11:55 AM, Ron Hansen wrote:



What are the available arming switch options?

Thanks

Ron


__________ Information from ESET Smart Security, version of virus signature
database 6877 (20120211) __________

The message was checked by ESET Smart Security.

http://www.eset.com
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20120212/db2a13c1/attachment.html>