[NSRCA-discussion] 3D Printed UAV Article...

[Wayne Galligan]

Matt,

They forgot to mention... some assembly required.

Wayne Galligan

----- Original Message ----- 
  From: rcmaster199 at aol.com 
  To: nsrca-discussion at lists.nsrca.org 
  Sent: Thursday, September 15, 2011 12:53 PM
  Subject: Re: [NSRCA-discussion] 3D Printed UAV Article...


  Ron,

  I remember the video. At first I was impressed. Then reality set in, realizing the video trickery. I'm a definite Doubting Thomas on that one; only one way I would believe it

  Jay Leno, huh!! The king of the put-on?

  Regards

  Matt



  -----Original Message-----
  From: ronlock <ronlock at comcast.net>
  To: General pattern discussion <nsrca-discussion at lists.nsrca.org>
  Sent: Thu, Sep 15, 2011 9:12 am
  Subject: Re: [NSRCA-discussion] 3D Printed UAV Article...


  Jay Leno visited a machine shop where they demo'd printing of a cresent wrench.
  The printing process made the wrench with the moving adjustable parts already assembled.
  They did not mention how long it took the printer.

  Ron Lockhart



------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20110915/2703fecf/attachment.html>