[NSRCA-discussion] Field Charging Battery Box

[Robert Campbell]

For power distributioon, get a couple of sets of binding posts that will accept banana plugs at Radio Shack.  They're about $5 for a pair.


Rob
  ----- Original Message ----- 
  From: Pascoe,Tim [Burlington] 
  To: General pattern discussion 
  Sent: Wednesday, May 25, 2011 3:06 PM
  Subject: Re: [NSRCA-discussion] Field Charging Battery Box


  Thanks Glenn. Any idea where the blue power distribution panel came from in the 2-charger layout? I've seen them in another post, but don't have any source info for them.

   

  Timothy Pascoe 
  Physical Sciences Specialist

   

  Yak Shaving - Any seemingly pointless activity which is actually necessary to solve a problem which solves a problem which, several levels of recursion later, solves the real problem you're working on

   

  Environment Canada / Environnement Canada
  Canada Centre for Inland Waters / Centre Canadien des Eaux Intérieures
  867 Lakeshore Road / 867, chemin Lakeshore
  Burlington, Ontario / Burlington (Ontario) 
  L7R 4A6

  Tel/Tél: (905) 336-6239
  Fax/Téléc: (905) 336-4609
  E-mail/C. élec: tim.pascoe at ec.gc.ca
  Government of Canada/Gouvernement du Canada 
  This e-mail represents the opinions and views solely held by its author and in no manner may be considered as representing those of his/her employer.

   

  From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Glen Watson
  Sent: Wednesday, May 25, 2011 3:29 PM
  To: 'General pattern discussion'
  Subject: Re: [NSRCA-discussion] Field Charging Battery Box

   

  Tim,

   

  Got to the following site http://www.electric-f3a.com/, in the middle section of the homepage scroll down until you see the link on building a custom charge box.

   

  Regards,

   

  Glen Watson

  http://glenwatson.blogspot.com/

   


------------------------------------------------------------------------------

  From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Pascoe,Tim [Burlington]
  Sent: Wednesday, May 25, 2011 2:09 PM
  To: nsrca-discussion at lists.nsrca.org
  Subject: [NSRCA-discussion] Field Charging Battery Box

  I'm starting the process of collecting all the pieces required to build a self-contained field charge box. I'm using an Iota power supply and FMA 10S charger, but really I'm looking for case designs regardless of the gear used. I surfed around RCUniverse, but only found a couple of short threads.  If you have a build thread from a forum, please pass it along, or any pics you might have of your own designs.

   

  I'm looking for as many ideas as I can find before I jump in! If this was covered in the past, I apologize - I'm a new convert to e-power for pattern and may have missed it in the past.

   

  Thanks,

   

  Tim Pascoe 

   



------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20110525/1c06604b/attachment.html>