[NSRCA-discussion] Field Charging Battery Box

[Pascoe,Tim [Burlington]]

Thanks Glenn. Any idea where the blue power distribution panel came from in the 2-charger layout? I've seen them in another post, but don't have any source info for them.

 

Timothy Pascoe 
Physical Sciences Specialist

 

Yak Shaving - Any seemingly pointless activity which is actually necessary to solve a problem which solves a problem which, several levels of recursion later, solves the real problem you're working on

 

Environment Canada / Environnement Canada
Canada Centre for Inland Waters / Centre Canadien des Eaux Intérieures
867 Lakeshore Road / 867, chemin Lakeshore
Burlington, Ontario / Burlington (Ontario) 
L7R 4A6

Tel/Tél: (905) 336-6239
Fax/Téléc: (905) 336-4609
E-mail/C. élec: tim.pascoe at ec.gc.ca <blocked::mailto:tim.pascoe at ec.gc.ca> 
Government of Canada/Gouvernement du Canada 
This e-mail represents the opinions and views solely held by its author and in no manner may be considered as representing those of his/her employer.

 

From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Glen Watson
Sent: Wednesday, May 25, 2011 3:29 PM
To: 'General pattern discussion'
Subject: Re: [NSRCA-discussion] Field Charging Battery Box

 

Tim,

 

Got to the following site http://www.electric-f3a.com/, in the middle section of the homepage scroll down until you see the link on building a custom charge box.

 

Regards,

 

Glen Watson

http://glenwatson.blogspot.com/

 

________________________________

From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Pascoe,Tim [Burlington]
Sent: Wednesday, May 25, 2011 2:09 PM
To: nsrca-discussion at lists.nsrca.org
Subject: [NSRCA-discussion] Field Charging Battery Box

I'm starting the process of collecting all the pieces required to build a self-contained field charge box. I'm using an Iota power supply and FMA 10S charger, but really I'm looking for case designs regardless of the gear used. I surfed around RCUniverse, but only found a couple of short threads.  If you have a build thread from a forum, please pass it along, or any pics you might have of your own designs.

 

I'm looking for as many ideas as I can find before I jump in! If this was covered in the past, I apologize - I'm a new convert to e-power for pattern and may have missed it in the past.

 

Thanks,

 

Tim Pascoe 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20110525/c0c8ff22/attachment.html>