[NSRCA-discussion] Servo centering/tester

Tue May 17 12:05:47 AKDT 2011

GWS sells a great servo tester.  It has several different testing  
options, including the "servo exercise mode" and can even tell you  
the pulse output of your transmitter.  Costs about $25.

Ron

On May 17, 2011, at 12:31 PM, Mark Atwood wrote:

> Does anyone use a simple servo centering device when installing  
> servo's short of hooking up the Tx and Rx?   I know there's a  
> variety of servo testers that will center the servo, just looking  
> for the best/least expensive setup.  Any suggestions?  I'm always  
> scrambling to find a battery/regulator/Rx and then bind it and set  
> it up just to center a servo.
>
> thanks!
>
>
> Mark Atwood
> Paragon Consulting, Inc.  |  President
> 5885 Landerbrook Drive Suite 130, Cleveland Ohio, 44124
> Phone: 440.684.3101 x102  |  Fax: 440.684.3102
> mark.atwood at paragon-inc.com  |  www.paragon-inc.com
>
>
>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion