[NSRCA-discussion] Abbra landing gear needed (electric)

[Dan Curtis]

I haven't noticed the gear being brittle, maybe you had some from a bad batch of epoxy or something, or maybe the ones I used on George's plane were just good epoxy by accident, who knows.

Anyway they maybe about the only way to go now days, specs on them below

Width 4-1/2"
Total Height 9"
Total Spread 19"

Weight is 5.0oz (142g)

The gear is 1-1/2" wide at the fuse (front to back) 
tappering down to 7/8" at the axle. 
This gear has 1-1/4" Rear Sweep


From: Bob Lavey 
Sent: Saturday, January 15, 2011 6:52 PM
To: 'General pattern discussion' 
Subject: Re: [NSRCA-discussion] Abbra landing gear needed (electric)


Thanks, Mike!

 

From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Mike Howard
Sent: Saturday, January 15, 2011 6:24 PM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] Abbra landing gear needed (electric)

 

      Bob, I think F3A unlimited carries the gear that replaced the Bolly stuff, and its better and I believe a couple of inches longer than your present gear.

       

       

      Mike

      --- On Sat, 1/15/11, Bob Lavey <bob.lavey at cox.net> wrote:


        From: Bob Lavey <bob.lavey at cox.net>
        Subject: [NSRCA-discussion] Abbra landing gear needed (electric)
        To: nsrca-discussion at lists.nsrca.org
        Date: Saturday, January 15, 2011, 9:46 PM

        I'm converting my Abbra from YS 160 power to electric, and since the landing
        gear I have is barely long enough for an 18" prop, there's no way it's going
        to work for at 21" prop.  Does anyone have a set of gear for that plane that
        they'd part with?

        Thanks,
        Bob


        _______________________________________________
        NSRCA-discussion mailing list
        NSRCA-discussion at lists.nsrca.org
        http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
     

 



--------------------------------------------------------------------------------


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20110116/14c3bc19/attachment.html>