[NSRCA-discussion] F-11

Thu Oct 28 17:27:22 AKDT 2010

start minus stop divided by two.

-----Original Message-----
From: Atwood, Mark <atwoodm at paragon-inc.com>
To: General pattern discussion <nsrca-discussion at lists.nsrca.org>
Sent: Thu, Oct 28, 2010 10:03 am
Subject: Re: [NSRCA-discussion] F-11

That depends on how fast you snap, and how fast you roll.  These maneuvers do not have a fixed center point in the maneuver sequence (like say a 4 pt would have) but rather the judge needs to evaluate the length of the entire sequence and determine if it was centered.  On these maneuvers, that cannot be done until the maneuver is complete (or at least until they’ve gone past center a longer distance than they started prior to center at which point you’ll know it’s not centered.)

Make sense???

Mark Atwood
Paragon Consulting, Inc.  |  President
5885 Landerbrook Drive Suite 130, Cleveland Ohio, 44124 
Phone: 440.684.3101 x102  |  Fax: 440.684.3102
mark.atwood at paragon-inc.com  |  www.paragon-inc.com

From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of arturo zapata
Sent: Thursday, October 28, 2010 9:20 AM
To: General pattern discussion
Subject: [NSRCA-discussion] F-11

Hello,

I have a question regarding F-11 sequence.

On maneuvers 7 and 13

Snap roll, with 4/8-pt. roll opposite, inverted exit and

Snap roll, with 4-pt. roll opposite, inverted exit

The code says "the maneuver must be centered" where the center occurs?

Regards,

Art

_______________________________________________
SRCA-discussion mailing list
SRCA-discussion at lists.nsrca.org
ttp://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_______________________________________________
SRCA-discussion mailing list
SRCA-discussion at lists.nsrca.org
ttp://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20101029/33266af9/attachment.html>