[NSRCA-discussion] Wire Tubes

[shinden1 at cox.net]

Yeah I here you on the carbon Matt, Thanks 

I think I`m gonna make them out of Balsa or paper 
too bad Don`s hobby is out of stock
Bryan
---- rcmaster199 at aol.com wrote: 
> Warning...
> ?
> Carbon is just too firm?for this application. The nylon plugs inside the tube will rub against the carbon surface (vibration) and abrade it.? Carbon dust? is electrically conductive?and once inside the plug may short the wiring and it doesn't take much.
> ?
> Be kiaful on this one
> ?
> MattK
> ?
> PS- Bryan I usually make my own from silkspan
> 
> 
> 
> 
> -----Original Message-----
> From: W. Eddie Batchelor <perkinsrx at centurytel.net>
> To: 'General pattern discussion' <nsrca-discussion at lists.nsrca.org>
> Sent: Mon, Oct 18, 2010 5:18 pm
> Subject: Re: [NSRCA-discussion] Wire Tubes
> 
> 
> 
> 
> Jerry Stebbins did earlier: 
> >Bryan, might look at the thin wall carbon tubes that CST have listed. Large 
> >soda straws work ok--but not with connectors. 
> >Jerry 
>  
>  
> Eddie 
> -----Original Message----- 
> From: nsrca-discussion-bounces at lists.nsrca.org 
> [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Keith Hoard 
> Sent: Monday, October 18, 2010 3:01 PM 
> To: General pattern discussion 
> Subject: Re: [NSRCA-discussion] Wire Tubes 
>  
> ?I can't believe nobody has suggested carbon fiber . . . . 
>  
> -----Original Message-----  
> From: glmiller3 at suddenlink.net 
> Sent: Monday, October 18, 2010 2:54 PM 
> To: General pattern discussion 
> Subject: Re: [NSRCA-discussion] Wire Tubes 
>  
> I just called Don's and those conduits are not avialable "the factory burned 
>  
> down".  So he suggested that we roll newspaper up and tape it. 
>  
> I still like my tampon tubes ;) 
>  
> George 
> ---- shinden1 at cox.net wrote: 
>  
> ============= 
> Cool thanks Ed! 
> Bryan 
> ---- ed skorepa <edskorepa at q.com> wrote: 
> > http://www.donshobbyshop.com/index.html in Accessories "Conduit Tubes"  
> > black 
> > in color, 36" in length, 1/2" dia, 6g, 8 for $10.95 
> > 
> > -----Original Message----- 
> > From: nsrca-discussion-bounces at lists.nsrca.org 
> > [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of 
> > shinden1 at cox.net 
> > Sent: Sunday, October 17, 2010 10:30 PM 
> > To: nsrca-discussion at lists.nsrca.org 
> > Subject: [NSRCA-discussion] Wire Tubes 
> > 
> > Guys, 
> >  I looking for a source for Light tubing to run Elevator servo wires to  
> > the 
> > back of an AIrplane. 
> > Does anyone know where I can get this? 
> > 
> > Bryan 
> > _______________________________________________ 
> > NSRCA-discussion mailing list 
> > NSRCA-discussion at lists.nsrca.org 
> > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion 
> > 
> > _______________________________________________ 
> > NSRCA-discussion mailing list 
> > NSRCA-discussion at lists.nsrca.org 
> > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion 
>  
> _______________________________________________ 
> NSRCA-discussion mailing list 
> NSRCA-discussion at lists.nsrca.org 
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion 
>  
> _______________________________________________ 
> NSRCA-discussion mailing list 
> NSRCA-discussion at lists.nsrca.org 
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion  
>  
> _______________________________________________ 
> NSRCA-discussion mailing list 
> NSRCA-discussion at lists.nsrca.org 
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion 
>  
> _______________________________________________ 
> NSRCA-discussion mailing list 
> NSRCA-discussion at lists.nsrca.org 
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion 
>