[NSRCA-discussion] Wire Tubes

[rcmaster199 at aol.com]

Warning...
?
Carbon is just too firm?for this application. The nylon plugs inside the tube will rub against the carbon surface (vibration) and abrade it.? Carbon dust? is electrically conductive?and once inside the plug may short the wiring and it doesn't take much.
?
Be kiaful on this one
?
MattK
?
PS- Bryan I usually make my own from silkspan




-----Original Message-----
From: W. Eddie Batchelor <perkinsrx at centurytel.net>
To: 'General pattern discussion' <nsrca-discussion at lists.nsrca.org>
Sent: Mon, Oct 18, 2010 5:18 pm
Subject: Re: [NSRCA-discussion] Wire Tubes




Jerry Stebbins did earlier: 
>Bryan, might look at the thin wall carbon tubes that CST have listed. Large 
>soda straws work ok--but not with connectors. 
>Jerry 
 
 
Eddie 
-----Original Message----- 
From: nsrca-discussion-bounces at lists.nsrca.org 
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Keith Hoard 
Sent: Monday, October 18, 2010 3:01 PM 
To: General pattern discussion 
Subject: Re: [NSRCA-discussion] Wire Tubes 
 
?I can't believe nobody has suggested carbon fiber . . . . 
 
-----Original Message-----  
From: glmiller3 at suddenlink.net 
Sent: Monday, October 18, 2010 2:54 PM 
To: General pattern discussion 
Subject: Re: [NSRCA-discussion] Wire Tubes 
 
I just called Don's and those conduits are not avialable "the factory burned 
 
down".  So he suggested that we roll newspaper up and tape it. 
 
I still like my tampon tubes ;) 
 
George 
---- shinden1 at cox.net wrote: 
 
============= 
Cool thanks Ed! 
Bryan 
---- ed skorepa <edskorepa at q.com> wrote: 
> http://www.donshobbyshop.com/index.html in Accessories "Conduit Tubes"  
> black 
> in color, 36" in length, 1/2" dia, 6g, 8 for $10.95 
> 
> -----Original Message----- 
> From: nsrca-discussion-bounces at lists.nsrca.org 
> [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of 
> shinden1 at cox.net 
> Sent: Sunday, October 17, 2010 10:30 PM 
> To: nsrca-discussion at lists.nsrca.org 
> Subject: [NSRCA-discussion] Wire Tubes 
> 
> Guys, 
>  I looking for a source for Light tubing to run Elevator servo wires to  
> the 
> back of an AIrplane. 
> Does anyone know where I can get this? 
> 
> Bryan 
> _______________________________________________ 
> NSRCA-discussion mailing list 
> NSRCA-discussion at lists.nsrca.org 
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion 
> 
> _______________________________________________ 
> NSRCA-discussion mailing list 
> NSRCA-discussion at lists.nsrca.org 
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion 
 
_______________________________________________ 
NSRCA-discussion mailing list 
NSRCA-discussion at lists.nsrca.org 
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion 
 
_______________________________________________ 
NSRCA-discussion mailing list 
NSRCA-discussion at lists.nsrca.org 
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion  
 
_______________________________________________ 
NSRCA-discussion mailing list 
NSRCA-discussion at lists.nsrca.org 
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion 
 
_______________________________________________ 
NSRCA-discussion mailing list 
NSRCA-discussion at lists.nsrca.org 
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20101019/807dddf6/attachment.html>