[NSRCA-discussion] Elevator servo

Dave DaveL322 at comcast.net
Thu Oct 14 07:58:14 AKDT 2010


8417 for one elevator servo
3517 for two elevator servos
8611A for rudder

8231 or 8101 nylon gearsets to convert the 8417 to 8417 "sa".......the speed
will decrease slightly, but the torque will go up slightly.

3025/3035 nylon gearsets to convert the 3517 to "sa".

Leave the 8611A as is.

Regards,

Dave Lockhart
Team Horizon/JR



-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Duane Beck
Sent: Thursday, October 14, 2010 10:50 AM
To: nsrca-discussion at lists.nsrca.org
Subject: [NSRCA-discussion] Elevator servo

I plan to move up to my first 2M soon (a Focus 2) and will need an elevator
(and rudder) servo.  What can you recommend, now that JR's SA servos appear
to be no longer available?  If necessary, I may be able to scavange an
8411SA or two from an unfinished 1/4 scale, but have to check if it's the SA
or metal gear version.

Duane
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion



More information about the NSRCA-discussion mailing list