[NSRCA-discussion] Help Needed

[Ron Van Putte]

Well, the simple answer is that you have to hold the bind button down  
longer than the instructions say.  Thanks for the responses.

Ron

On Oct 1, 2010, at 7:06 PM, Duane Beck wrote:

> I assume the region switch is still in the "General" position, and  
> that you've linked the module to the new receiver.
> Is the green light on and the red light off on the TX module?
> What do the green and red LEDs on the RX show?
>
> Duane
>
>> Houston Schweitzer has a Futaba 9ZAP transmitter with a Futaba 8-
>> channel 2.4 GHz module in it.  He wants to use it with a Futaba R617
>> receiver, so he put the switch on the module in the 7-channel
>> position and made sure that the parameter setting was PPM in the
>> transmitter's model programming, but the transmitter/receiver system
>> doesn't work.  Any ideas?
>>
>> Ron Van Putte
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion