[NSRCA-discussion] Help Needed

[Archie Stafford]

Talked to Houston. Its fixed. Forgot the TX had to be in PPM mode with that module. 

Arch

Sent from my iPhone

On Oct 1, 2010, at 8:48 PM, "Tony" <tony at radiosouthrc.com> wrote:

> JR does not import 2.4GHz stuff into the USA… What you mean is Spektrum….  LOL
>  
> Tony Stillman, President
> Radio South, Inc.
> 139 Altama Connector, Box 322
> Brunswick, GA  31525
> 1-800-962-7802
> www.radiosouthrc.com
> From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of William C. Harden
> Sent: Friday, October 01, 2010 8:17 PM
> To: 'General pattern discussion'
> Subject: Re: [NSRCA-discussion] Help Needed
>  
> That’s cold.
>  
> Bill
>  
> From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Jon Lowe
> Sent: Friday, October 01, 2010 7:12 PM
> To: nsrca-discussion at lists.nsrca.org
> Subject: Re: [NSRCA-discussion] Help Needed
>  
> Get a JR?  You left yourself wide open....
> 
> Jon Lowe
>  
> 
> -----Original Message-----
> From: Ron Van Putte <vanputte at cox.net>
> To: General pattern discussion <nsrca-discussion at lists.nsrca.org>
> Cc: Houston Schweitzer <wingmanp_47 at yahoo.com>
> Sent: Fri, Oct 1, 2010 6:06 pm
> Subject: [NSRCA-discussion] Help Needed
> 
> Houston Schweitzer has a Futaba 9ZAP transmitter with a Futaba 8-channel 2.4 GHz module in it. He wants to use it with a Futaba R617 receiver, so he put the switch on the module in the 7-channel position and made sure that the parameter setting was PPM in the transmitter's model programming, but the transmitter/receiver system doesn't work. Any ideas? 
>  
> Ron Van Putte 
>  
> _______________________________________________ 
> NSRCA-discussion mailing list 
> NSRCA-discussion at lists.nsrca.org 
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion 
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20101002/e6c9d098/attachment.html>