[NSRCA-discussion] Help Needed

[Tony]

JR does not import 2.4GHz stuff into the USA. What you mean is Spektrum..
LOL

 

Tony Stillman, President

Radio South, Inc.

139 Altama Connector, Box 322

Brunswick, GA  31525

1-800-962-7802

www.radiosouthrc.com

  _____  

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of William C.
Harden
Sent: Friday, October 01, 2010 8:17 PM
To: 'General pattern discussion'
Subject: Re: [NSRCA-discussion] Help Needed

 

That's cold.

 

Bill

 

  _____  

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Jon Lowe
Sent: Friday, October 01, 2010 7:12 PM
To: nsrca-discussion at lists.nsrca.org
Subject: Re: [NSRCA-discussion] Help Needed

 

Get a JR?  You left yourself wide open....

Jon Lowe

 

-----Original Message-----
From: Ron Van Putte <vanputte at cox.net>
To: General pattern discussion <nsrca-discussion at lists.nsrca.org>
Cc: Houston Schweitzer <wingmanp_47 at yahoo.com>
Sent: Fri, Oct 1, 2010 6:06 pm
Subject: [NSRCA-discussion] Help Needed

Houston Schweitzer has a Futaba 9ZAP transmitter with a Futaba 8-channel 2.4
GHz module in it. He wants to use it with a Futaba R617 receiver, so he put
the switch on the module in the 7-channel position and made sure that the
parameter setting was PPM in the transmitter's model programming, but the
transmitter/receiver system doesn't work. Any ideas? 
 
Ron Van Putte 
 
_______________________________________________ 
NSRCA-discussion mailing list 
NSRCA-discussion at lists.nsrca.org 
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20101002/f09cddc5/attachment.html>