[NSRCA-discussion] Condition in 9ZAP

[Mike Moritko]

Thanks everyone for your inputs.  In this particular case, the ATV settings 
in the default condition are in fact other than 100% and subtrims were used 
on all servos to center the output arms.  I'll check that first and if I 
still can't resolve the issue, I'll give Tony a call.  Thanks again.

Mike

--------------------------------------------------
From: <adriancwong at earthlink.net>
Sent: Tuesday, May 11, 2010 10:58 PM
To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
Subject: Re: [NSRCA-discussion] Condition in 9ZAP

> Mike,
>
> Go to both the ATV & the sub trim screen, then activate the switch, you 
> should see value changes.
>
> This will happen if you've assigned a different value on your ATV say 90% 
> on ail instead of the default 100% for normal flying, the activated 
> condition will not automatically carry the values over, and you've to 
> change it physically to match it. I believe the same goes for sub trim as 
> well.
>
> Adrian
>
> -----Original Message-----
>>From: Mike Moritko <mkmsg at cox.net>
>>Sent: May 11, 2010 11:31 PM
>>To: General pattern discussion <nsrca-discussion at lists.nsrca.org>
>>Subject: [NSRCA-discussion] Condition in 9ZAP
>>
>>This evening, I activated an unused condition and assigned it to a switch 
>>in
>>my 9ZAP.  I then copied the default condition into the newly activated
>>condition.  However, when I throw the switch back and forth between the
>>default and the newly established condition, my rudder and both aileron
>>servos move off center a bit.  Is there something in the programming for 
>>the
>>default condition that isn't carried over to the new condition during the
>>copy function....trims, subtrims, other?  I've reaccomplished this several
>>times and the result is always the same.  Has anyone else come across this
>>problem?  Thanks.
>>
>>Mike Moritko
>>
>>--------------------------------------------------
>>From: "Bob Kane" <getterflash at yahoo.com>
>>Sent: Tuesday, May 11, 2010 7:22 PM
>>To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
>>Subject: Re: [NSRCA-discussion] Karl Mueller update - good news!
>>
>>> Yes, like Andrew said, great news and thanks for the update.
>>>
>>> Bob Kane
>>> getterflash at yahoo.com
>>>
>>>
>>> --- On Tue, 5/11/10, Tom Simes <simestd at netexpress.com> wrote:
>>>
>>>> From: Tom Simes <simestd at netexpress.com>
>>>> Subject: [NSRCA-discussion] Karl Mueller update - good news!
>>>> To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
>>>> Date: Tuesday, May 11, 2010, 10:35 AM
>>>>
>>>> I've been corresponding with Monica (Karl's daughter) and
>>>> I'm happy to report that he is on the mend.  His
>>>> eyesight is improving, doctors are granting him day passes
>>>> out of the hospital and he is back on the NSRCA list.
>>>> Apparently Karl even BBQ'd dinner when he was home last
>>>> Sunday - quite an impressive improvement!
>>>>
>>>> To make it easier to access his e-mail, Karl has a new
>>>> address with Gmail:
>>>>
>>>>  kgamueller at gmail.com
>>>>
>>>> Please update your address books.  Karl's access to
>>>> e-mail is intermittent in the hospital, but feel free to
>>>> drop him a line.
>>>>
>>>> Welcome back Karl :)
>>>>
>>>> -- Tom
>>>>
>>>> ======================================================================
>>>>    "Z-80 system stack overflow.  Shut
>>>> 'er down Scotty, the system's
>>>>          sucking mud" - Error
>>>> message on TRS 80 Model-16B
>>>>
>>>> Tom Simes
>>>>
>>>>          simestd at netexpress.com
>>>> ======================================================================
>>>> _______________________________________________
>>>> NSRCA-discussion mailing list
>>>> NSRCA-discussion at lists.nsrca.org
>>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> NSRCA-discussion mailing list
>>> NSRCA-discussion at lists.nsrca.org
>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>
>>_______________________________________________
>>NSRCA-discussion mailing list
>>NSRCA-discussion at lists.nsrca.org
>>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>