[NSRCA-discussion] MG Servos to use

[Richard Lewis]

Hitec does not require the programmer....It is an optional item that can be used to tailor the servo to a particular application.  Out of the box, they are just like any other servo.

I borrowed a Hitec programmer once for to reverse the direction of a Hitec servo in a y-harnessed dual elevator setup.

Richard




________________________________
From: "rcmaster199 at aol.com" <rcmaster199 at aol.com>
To: nsrca-discussion at lists.nsrca.org
Sent: Mon, March 29, 2010 9:19:56 AM
Subject: [NSRCA-discussion] MG Servos to use


Hey folks,

I need some MG Digital Servos to use on the 78" Xtra. These need to have at least 100 in-ozs of torque and I prefer at least 0.15 sec transits. I've looked at Airtronics and JR.....For cored servos prices are not too bad but for coreless, prices are too high. I prefer coreless. 

Would someone with experience with the other brands shed some light on this? I'd like reasonably priced (50-70$ as opposed to 120$), metal geared servos with torque and speed shown above. I started to look at Hitec but I understand these need some kind of programmer!? The need is 4 at about 100 in-ozs and 1 at about 170 in-ozs

Thanks

Matt Kebabjian
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20100329/4cfdbb09/attachment.html>