[NSRCA-discussion] MG Servos to use

[Duane Beck]

I have not used these particular servos, but it looks like the Hyperion Atlas DM20X TMD meets your specs.  $48 each.
http://www.allerc.com/product_info.php?cPath=40&products_id=3958
Speed: 0.16/0.13 sec (4.8/6.0V)
Torque: 8.0/9.5 (Kg*cm), 111/132 (oz*in)
Size: 40.0 x 19.5 x 36.5 mm, 1.58 x 0.77 x 1.44 in

If you want to program the servo (not required), the USB cable is $18 and software download is free.
http://www.allerc.com/product_info.php?cPath=40&products_id=3091

Duane

> From: rcmaster199 at aol.com
> Sent: Monday, March 29, 2010 10:19:56 AM GMT -05:00 US/Canada Eastern
> Subject: [NSRCA-discussion] MG Servos to use
>
> Hey folks,
>  
> I need some MG Digital Servos to use on the 78" Xtra. These need to
> have at least 100 in-ozs of torque and I prefer at least 0.15 sec
> transits. I've looked at Airtronics and JR.....For cored servos prices
> are not too bad but for coreless, prices are too high. I prefer
> coreless.
>  
> Would someone with experience with the other brands shed some light on
> this? I'd like reasonably priced (50-70$ as opposed to 120$), metal
> geared servos with torque and speed shown above. I started to look at
> Hitec but I understand these need some kind of programmer!? The need
> is 4 at about 100 in-ozs and 1 at about 170 in-ozs
>  
> Thanks
>  
> Matt Kebabjian