[NSRCA-discussion] District 6 request.....

[rcmaster199 at aol.com]

Earl,

IsTx City long dead? If I remember, it wasreasonably close to Alvin, I think

Matt






-----Original Message-----
From: Earl Haury <ejhaury at comcast.net>
To: General pattern discussion <nsrca-discussion at lists.nsrca.org>
Sent: Thu, Jan 28, 2010 4:51 pm
Subject: Re: [NSRCA-discussion] District 6 request.....


Mark 
 
Probably the closest pattern active field is Fort Bend in Rosenberg, which is about an hour from Alvin. Andre, Henry, and I (sometimes) fly there. You're welcome to forward my email to him. (ejhaury at comcast.net) 
 
Earl 
 
----- Original Message ----- From: "Mark Hunt" <flyintexan at att.net> 
To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org> 
Sent: Thursday, January 28, 2010 2:49 PM 
Subject: [NSRCA-discussion] District 6 request..... 
 
> I'm on the extreme north side of Houston, so I'm looking for anyone in the > South Houston/Alvin area that might be able to help a fellow get back into > pattern.........see below.... 
> 
> 
> Mark, 
>> 
>> My wife and I moved to Houston (Alvin 
>> actually) in the middle of 2009 for work. I flew pattern back in the >> 90's 
>> for a few year in Baton Rouge. I am looking at picking it up again. I >> was 
>> wondering if you may be able to direct me to some field in the Houston 
>> (Alvin) area that may have a few pattern flyers. It is hard getting >> back, 
>> all the equipment has changed. It is also helpful to have someone to ask 
>> questions and critic your pattern. Any help or suggestions you may have 
>> would be helpful. 
>> 
> 
> 
> 
> _______________________________________________ 
> NSRCA-discussion mailing list 
> NSRCA-discussion at lists.nsrca.org 
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion  
_______________________________________________ 
NSRCA-discussion mailing list 
NSRCA-discussion at lists.nsrca.org 
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20100129/f2b35d79/attachment.html>