[NSRCA-discussion] Servos - Again

[Ihncheol Park]

Tim,

Here are the list of JR servos the were popular so far.

Ailerons : DS9411 
Dual Elevator servos : DS3421
Single Elevator servo : DS8231 (plastic gear).  DS8417 has been discontinued.
Rudder : DS8611

All the above are metal gears.  JR has discontinued all SA servos. If you need plastic/resin geared servos, you will need JRPSG321 and JRPSG911 to convert them to metal output with plastic gears.

You can also substitute DS8611 with DS8411 which can use JRPSG8101 to make it 8411SA.

Hope this helps,

Ihncheol

--- On Mon, 1/18/10, Pascoe,Tim [Burlington] <Tim.Pascoe at ec.gc.ca> wrote:

> From: Pascoe,Tim [Burlington] <Tim.Pascoe at ec.gc.ca>
> Subject: [NSRCA-discussion] Servos - Again
> To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
> Date: Monday, January 18, 2010, 12:33 PM
> 
> 
> 
>  
>  
> 
> 
> 
> 
> 
> 
>  
> 
> 
> 
> It’s been
> 3-4 years since I bought servos for a
> pattern plane, and when I went searching for my trusty
> selections for a new
> bird, I discovered that a lot has changed in a short
> time. 
> 
> 
>   
> 
> So –
> I’m looking for suggestions for Elevator,
> Rudder, and Aileron. I recently switched to Futaba for my
> transmitter, but was
> a JR guy previous to that and have always been happy with
> JR servos. I’d
> consider Futaba and Hitec as alternatives as
> well. 
> 
> 
>   
> 
> Thanks,
> 
> 
> 
>   
> 
> Tim
>  
> 
> 
> 
>  
> 
> 
> 
> -----Inline Attachment Follows-----
> 
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion