[NSRCA-discussion] Fwd: Hatch Latch

[Bob Kane]

Sounds like the voice of experience . . .


Bob Kane
getterflash at yahoo.com


--- On Sun, 1/10/10, Verne Koester <verne at twmi.rr.com> wrote:

> From: Verne Koester <verne at twmi.rr.com>
> Subject: Re: [NSRCA-discussion] Fwd:  Hatch Latch
> To: "'General pattern discussion'" <nsrca-discussion at lists.nsrca.org>
> Date: Sunday, January 10, 2010, 3:11 PM
> 
> 
> 
>  
>  
> 
> 
> 
> 
> 
> 
>  
> 
> 
> 
> Ron, 
> 
> You should mount the latch so
> it JUST disengages at full
> retraction (ahem….). You want the pin sunk into the
> flange as deep as possible.
> Our fuses do torque and move around as we thrash around up
> there. You need a
> cushion to compensate for that. 
> 
>    
> 
> Verne 
> 
>    
> 
> 
> 
> 
> 
> From:
> nsrca-discussion-bounces at lists.nsrca.org
> [mailto:nsrca-discussion-bounces at lists.nsrca.org]
> On Behalf Of Ron Hansen
> 
> Sent: Saturday, January 09, 2010 9:44 PM
> 
> To: 'General pattern discussion'
> 
> Subject: Re: [NSRCA-discussion] Fwd: Hatch
> Latch 
> 
> 
> 
> 
> 
>    
> 
> How long is the release lever on
> this one? 
> 
>   
> 
> -----Original Message-----
> 
> From: nsrca-discussion-bounces at lists.nsrca.org
> [mailto:nsrca-discussion-bounces at lists.nsrca.org] On
> Behalf Of Ed Lyerly
> 
> Sent: Saturday, January 09, 2010 6:43 PM
> 
> To: 'General pattern discussion'
> 
> Subject: Re: [NSRCA-discussion] Fwd: Hatch
> Latch 
> 
>   
> 
> I've used this one from
> Hobby
> Lobby on several airplanes …. over several years,
> with no problems. 
> 
> Ed 
> 
>   
> 
> http://www.hobby-lobby.com/hatchlatch.htm?pSearchQueryId=392265
> 
> 
>   
> 
>   
> 
>   
> 
> 
> 
> 
> 
> From: nsrca-discussion-bounces at lists.nsrca.org
> [mailto:nsrca-discussion-bounces at lists.nsrca.org]
> On Behalf Of Ronald Van Putte
> 
> Sent: Saturday, January 09, 2010 6:16 PM
> 
> To: General pattern discussion
> 
> Subject: Re: [NSRCA-discussion] Fwd: Hatch
> Latch 
> 
> 
> 
> 
> 
>   
> 
> No argument
> on the plastic arm
> being fragile.  However, with a smoothly engaging
> assembly, being beefy
> isn't necessary and they are very light. 
> 
> 
> 
>   
> 
> 
> 
> 
> 
> Ron 
> 
> 
> 
> 
> 
>   
> 
> 
> 
> 
> 
> On Jan 9,
> 2010, at 3:50 PM, Jon
> Lowe wrote: 
> 
> 
> 
>   
> 
> 
> 
> I can't recommend
> these. 
> The plastic lever arm is too brittle/not beefy and is
> easily broken with just a
> little force, such as a tight fit.  I've broken
> one, and so has Gary
> Courtney.  If the arm breaks, they are a bear to get
> open.  I like a
> lot of stuff from Hobby City, but this isn't one of
> them. 
> 
> 
> 
> 
> 
>   
> 
> 
> 
> 
> 
> Jon Lowe 
> 
> 
> 
> 
> 
>   
> 
> 
> 
> 
> 
>   
> 
> 
> 
> 
> 
> -----Original Message-----
> 
> From: Ronald Van Putte <vanputte at cox.net>
> 
> To: General pattern discussion <nsrca-discussion at lists.nsrca.org>
> 
> Sent: Sat, Jan 9, 2010 3:07 pm
> 
> Subject: [NSRCA-discussion] Fwd: Hatch Latch 
> 
> 
> 
> Here they are:  http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=9218
>  
> 
> 
> 
>   
> 
> 
> 
> 
> 
> Ron 
> 
> 
> 
> 
> 
>   
> 
> 
> 
>   
> 
> 
> 
> Begin forwarded
> message: 
> 
> 
> 
>   
> 
> 
> 
> From: Ronald
> Van Putte <vanputte at cox.net>
> 
> 
> 
> 
> 
> 
> Date: January
> 9, 2010 2:48:36 PM CST 
> 
> 
> 
> 
> 
> To: General
> pattern discussion <nsrca-discussion at lists.nsrca.org>
> 
> 
> 
> 
> 
> 
> Subject: Re: [NSRCA-discussion]
> Hatch Latch 
> 
> 
> 
> 
> 
> Reply-To: General
> pattern discussion <nsrca-discussion at lists.nsrca.org>
> 
> 
> 
> 
> 
> 
>   
> 
> 
> 
> Mike Hester put some slick
> white plastic ones on the canopy of the Black Magics he
> built.  I think
> they come from China and have seen them on the
> HobbyCity/HobbyKing web site.
>  Mike, are you out there?  
> 
> 
> 
>   
> 
> 
> 
> 
> 
> Ron Van Putte 
> 
> 
> 
> 
> 
>   
> 
> 
> 
> 
> 
> On Jan 9, 2010, at 2:08 PM,
> Ron Hansen wrote: 
> 
> 
> 
>   
> 
> 
> 
> 
> 
> Can anyone recommend a spring
> loaded hatch latch that will work on a 1/8” thich
> fuse side to hold on my
> canopy? 
> 
> 
> 
> 
> 
>   
> 
> 
> 
> 
> 
> Thanks 
> 
> 
> 
> 
> 
> 
> 
> _______________________________________________
> 
> 
> 
> 
> 
> 
> NSRCA-discussion mailing
> list 
> 
> 
> 
> 
> 
> NSRCA-discussion at lists.nsrca.org
> 
> 
> 
> 
> 
> 
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> 
> 
> 
> 
> 
> 
>   
> 
> 
> 
> 
> 
> _______________________________________________
> 
> 
> 
> 
> 
> 
> NSRCA-discussion mailing
> list 
> 
> 
> 
> 
> 
> NSRCA-discussion at lists.nsrca.org
> 
> 
> 
> 
> 
> 
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> 
> 
> 
> 
> 
> 
>   
> 
> 
> 
> =  
> 
> 
> 
> _______________________________________________
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
>  NSRCA-discussion mailing
> list
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
>  NSRCA-discussion at lists.nsrca.org
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
>  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
>   
> 
> 
> 
> 
> 
> _______________________________________________
> 
> 
> 
> 
> 
> 
> NSRCA-discussion mailing list 
> 
> 
> 
> 
> 
> NSRCA-discussion at lists.nsrca.org
> 
> 
> 
> 
> 
> 
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> 
> 
> 
> 
> 
> 
>   
> 
> 
> 
> 
> 
> 
> 
> __________ Information from ESET Smart Security, version of
> virus signature
> database 4757 (20100109) __________
> 
> 
> 
> The message was checked by ESET Smart Security.
> 
> 
> 
> http://www.eset.com 
> 
> 
> 
>  
> 
> 
> 
> -----Inline Attachment Follows-----
> 
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion